LH28F640BFHE-PBTL70A Sharp Microelectronics, LH28F640BFHE-PBTL70A Datasheet - Page 14

• Manufacturer Part Number: LH28F640BFHE-PBTL70A
• Description: Flash Mem Parallel 3V/3.3V 64M-Bit 4M x 16 70ns 48-Pin TSOP
• Manufacturer: Sharp Microelectronics

Specifications of LH28F640BFHE-PBTL70A

• Package: 48TSOP
• Cell Type: NOR
• Density: 64 Mb
• Architecture: Sectored
• Block Organization: Asymmetrical
• Location Of Boot Block: Bottom
• Typical Operating Supply Voltage: 3|3.3 V
• Sector Size: 8KByte x 8|64KByte x 127
• Timing Type: Asynchronous
• Operating Temperature: -40 to 85 °C
• Interface Type: Parallel

8. If the program operation in one partition is suspended and the erase operation in other partition is also suspended, the
9. Full chip erase and OTP program operations can not be suspended. The OTP Program command can not be accepted while
10. Following the Clear Block Lock Bit command, block which is not locked-down is unlocked when WP# is V
11. Commands other than those shown above are reserved by SHARP for future device implementations and should not be
LH28F640BF series for details.
suspended program operation should be resumed first, and then the suspended erase operation should be resumed next.
the block erase operation is being suspended.
WP# is V
used.
IH
, lock-down bit is disabled and the selected block is unlocked regardless of lock-down configuration.
LHF64FG8
Rev. 2.45
IL
. When
11