EP1S30F1020C5N Altera, EP1S30F1020C5N Datasheet - Page 144

• Manufacturer Part Number: EP1S30F1020C5N
• Description: Stratix
• Manufacturer: Altera

Specifications of EP1S30F1020C5N

• Family Name: Stratix
• Number Of Logic Blocks/elements: 32470
• # I/os (max): 726
• Frequency (max): 500MHz
• Process Technology: 0.13um (CMOS)
• Operating Supply Voltage (typ): 1.5V
• Logic Cells: 32470
• Ram Bits: 3317184
• Operating Supply Voltage (min): 1.425V
• Operating Supply Voltage (max): 1.575V
• Operating Temp Range: 0C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 1020
• Package Type: FC-FBGA
• Lead Free Status / Rohs Status: Compliant

High-Speed Differential I/O Support
High-Speed
Differential I/O
Support
2–130
Stratix Device Handbook, Volume 1
Notes to
(1)
(2)
(3)
(4)
(5)
(6)
1.5
1.8
2.5
3.3
Table 2–36. Stratix MultiVolt I/O Support
To drive inputs higher than V
inputs to the device, enable the PCI clamping diode to prevent V
The input pin current may be slightly higher than the typical value.
Although V
different level can still interface with the Stratix device if it has inputs that tolerate the V
Stratix devices can be 5.0-V tolerant with the use of an external resistor and the internal PCI clamp diode.
This is the external signal that is driving the Stratix device.
This represents the system voltage that Stratix supports when a VCCIO pin is connected to a specific voltage level.
For example, when VCCIO is 3.3 V and if the I/O standard is LVTTL/LVCMOS, the output high of the signal
coming out from Stratix is 3.3 V and is compatible with 3.3-V or 5.0-V systems.
V
CCIO
Table
(V)
2–36:
CCIO
f
specifies the voltage necessary for the Stratix device to drive out, a receiving device powered at a
v
1.5 V
v
(2)
The output levels are compatible with systems of the same voltage as the
power supply (i.e., when VCCIO pins are connected to a 1.5-V power
supply, the output levels are compatible with 1.5-V systems). When
VCCIO pins are connected to a 3.3-V power supply, the output high is
3.3 V and is compatible with 3.3-V or 5.0-V systems.
Table 2–36
Stratix devices contain dedicated circuitry for supporting differential
standards at speeds up to 840 Mbps. The following differential I/O
standards are supported in the Stratix device: LVDS, LVPECL,
HyperTransport, and 3.3-V PCML.
There are four dedicated high-speed PLLs in the EP1S10 to EP1S25
devices and eight dedicated high-speed PLLs in the EP1S30 to EP1S80
devices to multiply reference clocks and drive high-speed differential
SERDES channels.
See the Stratix device pin-outs at www.altera.com for additional high
speed DIFFIO pin information for Stratix devices.
1.8 V
v
v
CCIO
Input Signal
but less than 4.1 V, disable the PCI clamping diode. However, to drive 5.0-V
v
v
v
2.5 V
v
summarizes Stratix MultiVolt I/O support.
(2)
(2)
(2)
Note (1)
(5)
v
v
3.3 V
v
v
(2)
(2)
v
5.0 V
(4)
I
from rising above 4.0 V.
v
v
v
1.5 V
v
(3)
(3)
(3)
v
v
1.8 V
v
Output Signal
(3)
(3)
v
2.5 V
v
CCIO
(3)
Altera Corporation
value.
(6)
3.3 V
v
July 2005
5.0 V
v