470-3105-100 Amphenol, 470-3105-100 Datasheet - Page 20

• Manufacturer Part Number: 470-3105-100
• Manufacturer: Amphenol
• Type: Backplaner

Specifications of 470-3105-100

• Gender: HDR
• Body Orientation: Straight
• Number Of Contact Rows: 4
• Number Of Contacts: 300POS
• Termination Method: Solder
• Mounting Style: Surface Mount
• Lead Free Status / RoHS Status: Compliant

Copyright © Amphenol Corporation 2005-2008 • All rights reserved
• Shortened “custom” nozzle may be required.
• Specific placement order and connector location
• Large bore nozzle is required for maximum
•
have the same requirements as the 0-1/2” range with the following added restrictions.
(Refer to placement machine specs for more
info)
on board assembly may be required.
vacuum force – placements should be verified to
insure correct nozzle selection.
vision system alignment.
Connector should be pre-oriented for machine
7.2 Placement Process – 15.5 and 23.5mm Receptacles*
These connector heights exceed the 1/2” maximum height for most common placement machines, and
DFM and SMT Assembly Guideline
Requirements
*Contact Amphenol TCS for more
detailed SMT application instructions on
taller NeXLev connectors
• Part can be presented within the camera’s focal
• Avoid interference of previously placed part, as the
• Prevents nozzle slip/skew, between camera and
plane, avoid part interferences with machine
conveyor, board sensors, and placement head
hardware
placement head moves across the board to place a
second part.
placement, due to connector weight.
DFM Impact/Benefit
Page 20 of 29
Revision “E“
TB-2082