AD9547/PCBZ Analog Devices Inc, AD9547/PCBZ Datasheet - Page 25

• Manufacturer Part Number: AD9547/PCBZ
• Description: Clock Generator/Synchronizer Evaluation Board
• Manufacturer: Analog Devices Inc

Specifications of AD9547/PCBZ

• Silicon Manufacturer: Analog Devices
• Application Sub Type: Network Clock Generator/Synchronizer
• Kit Application Type: Clock & Timing
• Silicon Core Number: AD9547
• Main Purpose: Timing, Clock Generator
• Embedded: No
• Utilized Ic / Part: AD9547
• Primary Attributes: 2 Differential or 4 Single Ended Inputs
• Secondary Attributes: CMOS, LVPECL & LVDS Compatible
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

9.
The clock distribution parameters reside in the 0x0400 register
address space. They include the following:
•
•
•
•
•
•
10. The reference input parameters reside in the 0x0500
•
•
•
•
11. Program the reference profiles.
The reference profile parameters reside in the 0x0600 and
0x0700 register address spaces. They include the following:
•
•
•
•
•
•
•
•
•
Program the clock distribution outputs.
Output power-down control
Output enable (disabled by default)
Output synchronization
Output mode control
Output divider functionality
Program the reference inputs.
register address space. They include the following:
Reference power-down
Reference logic family
Reference profile assignment control
Phase build-out control
Reference priority
Reference period
Reference period tolerance
Reference validation timer
Reference redetect timer
Digital loop filter coefficients
Reference prescaler (R divider)
Feedback dividers (S, U, and V)
Phase and frequency lock detector controls
Rev. B | Page 25 of 104
12. Generate reference acquisition.
After the registers are programmed, issue an I/O update using
Register 0x0005, Bit 0 to invoke all of the register settings that have
been programmed up to this point.
If the settings are programmed for manual profile assignment,
the DPLL locks to the first available reference that has the highest
priority. If the settings are programmed for automatic profile
assignment, then write to the reference profile selection register
(Address 0x0A0D) to select the state machines that require starting.
Next, issue an I/O update (Address 0x0005, Bit 0) to start the
selected state machines. Upon completion of the reference
detection sequence, the DPLL locks to the first available
reference with the highest priority.
13. Generate the output clock.
If the registers are programmed for automatic clock distribution
synchronization via DPLL phase or frequency lock, the synthesized
output signal appears at the clock distribution outputs (assuming
that the output is enabled and the DDS output signal has been
routed to the CLKINx input pins). Otherwise, set and then clear
the sync distribution bit (Address 0x0A02, Bit 1) or use a multi-
function pin input (if programmed accordingly) to generate
a clock distribution sync pulse, which causes the synthesized
output signal to appear at the clock distribution outputs.
AD9547