PIC18F6680-I/L Microchip Technology, PIC18F6680-I/L Datasheet - Page 135

• Manufacturer Part Number: PIC18F6680-I/L
• Description: Microcontrollers (MCU) 64KB 3328 RAM 52 I/O
• Manufacturer: Microchip Technology

Specifications of PIC18F6680-I/L

• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3.25 KB
• Interface Type: I2C/SPI/AUSART/CAN
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 5
• Operating Supply Voltage: 4.2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12-ch x 10-bit
• Program Memory Type: Flash
• Program Memory Size: 64 KB
• Package / Case: PLCC-68
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

10.4
PORTD is an 8-bit wide, bidirectional port. The corre-
sponding data direction register is TRISD. Setting a
TRISD bit (= 1) will make the corresponding PORTD
pin an input (i.e., put the corresponding output driver in
a high-impedance mode). Clearing a TRISD bit (= 0)
will make the corresponding PORTD pin an output (i.e.,
put the contents of the output latch on the selected pin).
The Data Latch register (LATD) is also memory mapped.
Read-modify-write operations on the LATD register read
and write the latched output value for PORTD.
PORTD is an 8-bit port with Schmitt Trigger input
buffers. Each pin is individually configurable as an input
or output.
On PIC18F8X8X devices, PORTD is multiplexed with
the system bus as the external memory interface; I/O
port functions are only available when the system bus
is disabled by setting the EBDIS bit in the MEMCOM
register (MEMCON<7>). When operating as the exter-
nal memory interface, PORTD is the low-order byte of
the multiplexed address/data bus (AD7:AD0).
PORTD can also be configured as an 8-bit wide micro-
processor port (Parallel Slave Port) by setting control
bit, PSPMODE (TRISE<4>). In this mode, the input
buffers are TTL. See Section 10.10 “Parallel Slave
Port (PSP)” for additional information.
EXAMPLE 10-4:
 2004 Microchip Technology Inc.
Note:
CLRF
CLRF
MOVLW
MOVWF
PORTD, TRISD and LATD
Registers
PORTD
LATD
0CFh
TRISD
On a Power-on Reset, these pins are
configured as digital inputs.
; Initialize PORTD by
; clearing output
; data latches
; Alternate method
; to clear output
; data latches
; Value used to
; initialize data
; direction
; Set RD<3:0> as inputs
; RD<5:4> as outputs
; RD<7:6> as inputs
INITIALIZING PORTD
PIC18F6585/8585/6680/8680
FIGURE 10-9:
RD TRISD
RD PORTD
RD LATD
Data
Bus
WR TRISD
Note 1:
WR LATD
or
PORTD
I/O pins have diode protection to V
TRIS Latch
Data Latch
D
D
CK
CK
PORTD BLOCK DIAGRAM
IN I/O PORT MODE
Q
Q
Q
EN
DS30491C-page 133
EN
Schmitt
Trigger
Input
Buffer
D
DD
and V
SS
I/O pin
.
(1)