ADUC7032BSTZ-8V-RL Analog Devices Inc, ADUC7032BSTZ-8V-RL Datasheet - Page 77

• Manufacturer Part Number: ADUC7032BSTZ-8V-RL
• Description: IC BATTERY SENSOR PREC 48-LQFP
• Manufacturer: Analog Devices Inc
• Series: MicroConverter® ADuC7xxxr

Specifications of ADUC7032BSTZ-8V-RL

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 20.48MHz
• Connectivity: LIN, SPI, UART/USART
• Peripherals: POR, PSM, Temp Sensor, WDT
• Number Of I /o: 9
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 18 V
• Data Converters: A/D 2x16b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 48-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Other names: ADUC7032BSTZ-8V-RLCT

Preliminary Technical Data
TIMERS
The ADuC7032 features four general purpose Timer/Counters:
The four timers in their normal mode of operation may either
be free-running or periodic.
- In free-running mode the counter decrements/increments
- In periodic mode the counter decrements/increments from
from the maximum/minimum value until zero/full scale and
starts again at the maximum /minimum value.
the value in the Load Register(TxLD MMR,) until zero/full
scale and starts again at the value stored in the Load Register.
Bit
10
11
12
13
14
15
16
0
1
2
3
4
5
6
7
8
9
- Timer0, or Life-Time Timer
- Timer1,
- Timer2 or Wake-up Timer,
- Timer3 or Watchdog Timer.
Description
Timer 0
Timer 1
Timer 2 - Wake Up timer
Timer 3 - Watchdog Timer
Reserved
LIN Hardware
Flash/EE Interrupt
PLL Lock
ADC
UART
SPI
XIRQ0
XIRQ1
Reserved
IRQ3 High Voltage IRQ
XIRQ4
XIRQ5
( GPIO IRQ 0 )
( GPIO IRQ 1 )
( GPIO IRQ 4 )
( GPIO IRQ 5 )
Table 43 : Timer Event Capture
For more information please refer to:
Timer0 – Life-Time timer Page 78
Timer1 Page 79
Timer2 - Wake-Up Timer Page 82
Timer3 - Watchdog Timer Page 83
Should be written as zero
LIN (Local Interconnect Network ) INTERFACE Page 115
Flash/EE memory Control Interface Page 31
ADuC7032 System Clocks Page 68
16-Bit Σ−∆ Analog to Digital Converters Page 44
UART SERIAL INTERFACE Page 105
SERIAL PERIPHERAL INTERFACE Page 112
General Purpose I/O Page 84
General Purpose I/O Page 84
Should be written as zero
High Voltage Interrupt
General Purpose I/O Page 84
General Purpose I/O Page 84
Rev. PrD | Page 77 of 128
The value of a counter can be read at any time by accessing its
value register (TxVAL). Timers are started by writing in the
Control register of the corresponding timer (TxCON).
In normal mode, an IRQ is generated each time the value of the
counter reaches zero, if counting down, or full-scale, if counting
up. An IRQ can be cleared by writing any value to Clear register
of the particular timer (TxCLRI). Once TxCLRI is written to,
the Timer is reloaded with TxLD within 4 clocks of the timers
clock source.
ADuC7032