DF2166VTE33 Renesas Electronics America, DF2166VTE33 Datasheet - Page 578

• Manufacturer Part Number: DF2166VTE33
• Description: MCU FLASH 3V 512K 33MHZ 144TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2166VTE33

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

16.3.10 SERIRQ Control Register 0 (SIRQCR0)
The SIRQCR0 register contains status bits that indicate the SERIRQ operating mode and status
bits that specify SERIRQ0 interrupt sources.
The SIRQCR0 register is initialized to H'00 by a reset or in hardware standby mode.
Rev. 3.00, 03/04, page 536 of 830
Bit
7
6
5
Bit Name Initial Value Slave Host Description
Q/C
SELREQ 0
IEDIR
0
0
R
R/W
R/W
R/W



Quiet/Continuous Mode Flag
Indicates the mode specified by the host at the end
of an SERIRQ transfer cycle (stop frame).
0: Continuous mode
[Clearing conditions]
•
•
1: Quiet mode
[Setting condition]
•
Start Frame Initiation Request Select
Specifies the condition of start frame activation when
the host interrupt request is cleared in quiet mode.
0: When all host interrupt requests are cleared in
1: When at least one host interrupt request is
Interrupt Enable Direct Mode
Specifies whether LPC channel 2 SERIRQ interrupt
source (SMI, HIRQ6, HIRQ9 to HIRQ11) generation
is conditional upon OBF, or is controlled only by the
host interrupt enable bit.
0: Host interrupt is requested when host interrupt
1: Host interrupt is requested when host interrupt
quiet mode, start frame initiation is requested
cleared in quiet mode, start frame initiation is
requested
enable bit and corresponding OBF are both set to
1
enable bit is set to 1
LPC hardware reset, LPC software reset
Specification by the stop frame of the SERIRQ
transfer cycle
Specification by the stop frame of the SERIRQ
transfer cycle