D12332VFC20V Renesas Electronics America, D12332VFC20V Datasheet - Page 896

• Manufacturer Part Number: D12332VFC20V
• Description: IC H8S/2332 MCU ROMLESS 144QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of D12332VFC20V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Type: ROMless
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 4x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-QFP
• For Use With: EDK2329 - DEV EVALUATION KIT H8S/2329
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Table 21.3 MSTP Bits and Corresponding On-Chip Supporting Modules
Register
MSTPCRH
MSTPCRL
Note: Bits 8 and 4 to 0 can be read or written to, but do not affect operation.
21.5.2
DMAC/DTC Module Stop: Depending on the operating status of the DMAC or DTC, the
MSTP15 and MSTP14 bits may not be set to 1. Setting of the DMAC or DTC module stop mode
should be carried out only when the respective module is not activated.
For details, refer to section 7, DMA Controller, and section 8, Data Transfer Controller.
On-Chip Supporting Module Interrupts: Relevant interrupt operations cannot be performed in
module stop mode. Consequently, if module stop mode is entered when an interrupt has been
requested, it will not be possible to clear the CPU interrupt source or the DMAC or DTC
activation source. Interrupts should therefore be disabled before entering module stop mode.
Writing to MSTPCR: MSTPCR should only be written to by the CPU.
Rev.4.00 Sep. 07, 2007 Page 864 of 1210
REJ09B0245-0400
Usage Notes
Bit
MSTP15
MSTP14
MSTP13
MSTP12
MSTP11
MSTP10
MSTP9
MSTP8
MSTP7
MSTP6
MSTP5
MSTP4
MSTP3
MSTP2
MSTP1
MSTP0
Module
DMA controller (DMAC)
Data transfer controller (DTC)
16-bit timer-pulse unit (TPU)
8-bit timer module
Programmable pulse generator (PPG)
D/A converter (channels 0 and 1)
A/D converter
—
Serial communication interface (SCI) channel 2
Serial communication interface (SCI) channel 1
Serial communication interface (SCI) channel 0
—
—
—
—
—