PIC16F76-I/ML Microchip Technology, PIC16F76-I/ML Datasheet - Page 311

• Manufacturer Part Number: PIC16F76-I/ML
• Description: IC MCU FLASH 8KX14 A/D 28QFN
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F76-I/ML

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Size: 14KB (8K x 14)
• Program Memory Type: FLASH
• Ram Size: 368 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 5x8b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 368 B
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 22
• Number Of Timers: 3 bit
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000, DM163022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 5 bit
• For Use With: XLT28QFN4 - SOCKET TRANS ICE 28QFN W/CABLEAC164322 - MODULE SOCKET MPLAB PM3 28/44QFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: PIC16F76-I/MLR; PIC16F76-I/MLR; PIC16F76I/ML

17.4.10.1 WCOL Status Flag
1997 Microchip Technology Inc.
If the user writes the SSPBUF when a Repeated Start sequence is in progress, then WCOL is
set and the contents of the buffer are unchanged (the write doesn’t occur).
Figure 17-22: Repeat Start Condition Waveform
Note:
Falling edge of ninth clock
SDA
SCL
Because queueing of events is not allowed, writing of the lower 5 bits of SSPCON2
is disabled until the Repeated Start condition is complete.
End of Xmit
Write to SSPCON2
occurs here.
SDA = 1,
SCL(no change)
Preliminary
T
SDA = 1,
SCL = 1
BRG
T
BRG
Section 17. MSSP
Sr = Repeated Start
T
BRG
At completion of start bit,
hardware clear RSEN bit
Set S (SSPSTAT<3>)
and set SSPIF
Write to SSPBUF occurs here.
T
BRG
1st Bit
T
BRG
DS31017A-page 17-35
17