TMPM362F10FG Toshiba, TMPM362F10FG Datasheet - Page 564

• Manufacturer Part Number: TMPM362F10FG
• Description: 32BIT MICROCONTROLLER
• Manufacturer: Toshiba
• Series: TX03r

Specifications of TMPM362F10FG

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 64MHz
• Connectivity: I²C, Microwire, SIO, SPI, SSP, UART/USART
• Peripherals: DMA, WDT
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Package / Case: 144-LQFP
• Processor Series: TX03
• Core: ARM Cortex M3
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 1024K
• Rom Type: Flash
• Ram (kbytes): 64K
• Number Of Pins: 144
• Package: LQFP(20x20)
• Vcc: 3V
• Cpu Mhz: 64
• Ssp (ch) Spi: 1
• I2c/sio (ch): 5
• Uart/sio (ch): 12
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: Y
• Cs/wait Controller (ch): 4
• Dma Controller: 2
• 10-bit Da Converter: -
• 10-bit Ad Converter: 16
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 16
• Motor / Igbt Control: -
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: Y
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Operating Temperature: -
• Number Of I /o: -
• Eeprom Size: -
• Oscillator Type: -
• Lead Free Status / Rohs Status: Details
• Other names: Q5704184A

16.4
Operation Description
(3)
ing a Remote Control Signal in a Phase Method".
Threshold of 0/1
determination
detemination
result
Based on a falling edge cycle, the data bit is determined as 0 or 1.
There are two kinds of determinations:
The followings shows the determination model of data bit.
As for data bit determination of a remote control signal in a phase method, see"16.4.1.8 Receiv-
Setting of 0/1 determination data bit
Data bit
waveform
Threshold of 0/1 detemination is set to 2.5T with the <RMCDATL[6:0]>bit.
1. Determination by threshold.
2. Determination by falling edge interrupt inputs.
ta bit as "0" or "1." If the determination value is equal to threshold value or more, it is deter-
mined as "1." If the determination value is less than threshold value, it is determined as "0."
ing edge interrupt can be generated in each falling edge of the data bit. Using this interrupt
together with a timer enables the determination to be done by software.
Configure a threshold value to RMCxRCR3<RMCDATL[6:0]> bit which determines da-
By setting "1" to the RMCxRCR2<RMCEDIEN> bit, a remote control signal input fall-
T
T
Remote control input falling edge interrupt
T
Page 540
"0"
T
T
T
"1"
T
T
"0"
T
TMPM362F10FG
T