TMPM362F10FG Toshiba, TMPM362F10FG Datasheet - Page 491

• Manufacturer Part Number: TMPM362F10FG
• Description: 32BIT MICROCONTROLLER
• Manufacturer: Toshiba
• Series: TX03r

Specifications of TMPM362F10FG

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 64MHz
• Connectivity: I²C, Microwire, SIO, SPI, SSP, UART/USART
• Peripherals: DMA, WDT
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Package / Case: 144-LQFP
• Processor Series: TX03
• Core: ARM Cortex M3
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 1024K
• Rom Type: Flash
• Ram (kbytes): 64K
• Number Of Pins: 144
• Package: LQFP(20x20)
• Vcc: 3V
• Cpu Mhz: 64
• Ssp (ch) Spi: 1
• I2c/sio (ch): 5
• Uart/sio (ch): 12
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: Y
• Cs/wait Controller (ch): 4
• Dma Controller: 2
• 10-bit Da Converter: -
• 10-bit Ad Converter: 16
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 16
• Motor / Igbt Control: -
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: Y
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Operating Temperature: -
• Number Of I /o: -
• Eeprom Size: -
• Oscillator Type: -
• Lead Free Status / Rohs Status: Details
• Other names: Q5704184A

14.6.3
14.6.3.1
er the SBI is in the master or slave mode.
INTSBIx interrupt
if MST = 0
Then go to the slave-mode processing.
if TRX = 0
Then go to the receiver-mode processing.
if LRB = 0
Then go to processing for generating the stop condition.
SBIxCR1
SBIxDBR
End of interrupt processing.
At the end of a data word transfer, the INTSBIx interrupt is generated to test <MST> to determine wheth-
Transferring a Data Word
(1)
Test <TRX> to determine whether the SBI is configured as a transmitter or a receiver.
Master mode (<MST> = "1")
has eight bits, the data is written into SBIxDBR. If the data has different length, <BC[2:0]> and
<ACK> are programmed and the transmit data is written into SBIxDBR.Writing the data makes
<PIN> to "1", causing the SCL pin to generate a serial clock for transferring a next data word, and
the SDA pin to transfer the data word.
"0", and the SCL pin is pulled to the "Low" level.
Test <LRB>. If <LRB> is "1", that means the receiver requires no further data.
The master then generates the stop condition as described later to stop transmission.
If <LRB> is "0", that means the receiver requires further data.If the next data to be transmitted
After the transfer is completed, the INTSBIx interrupt request is generated, <PIN> is cleared to
To transmit more data words, test <LRB> again and repeat the above procedure.
Note:X; Don’t care
Transmitter mode (<TRX> = "1")
←
←
X
X
X
X
X
X
X
X
0
X
X
X
X
X
Page 467
X
X
Specifies the number of bits to be transmitted and
specify whether ACK is required.
Writes the transmit data.
TMPM362F10FG