UPD78F0500AMC-CAB-AX Renesas Electronics America, UPD78F0500AMC-CAB-AX Datasheet - Page 925

• Manufacturer Part Number: UPD78F0500AMC-CAB-AX
• Description: MCU 8BIT 30SSOP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx2r

Specifications of UPD78F0500AMC-CAB-AX

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 23
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

78K0/Kx2
A.3.2 When using on-chip debug emulator with programming function QB-MINI2
A.4 Debugging Tools (Hardware)
A.4.1 When using in-circuit emulator QB-78K0KX2
R01UH0008EJ0401 Rev.4.01
Jul 15, 2010
QB-MINI2
On-chip debug emulator with
programming function
Target connector specifications
QB-78K0KX2
In-circuit emulator
QB-144-CA-01
Check pin adapter
QB-80-EP-01T
Emulation probe
QB-xxxx-EA-xxx
Exchange adapter
QB-xxxx-YS-xxx
Space adapter
QB-xxxx-YQ-xxx
YQ connector
QB-xxxx-HQ-xxx
QB-xxxx-NQ-xxx
Mount adapter
Target connector
Remarks 1. The QB-MINI2 is supplied with a USB interface cable and connection cables (10-pin cable and 16-pin
(Note and Remarks are listed on the next page or later.)
2. Download the software for operating the QB-MINI2 from the download site for development tools
Note
Note
Note
Note
Note
cable), and the 78K0-OCD board. A connection cable (10-pin cable) and the 78K0-OCD board are used
only when using the on-chip debug function.
(http://www2.renesas.com/micro/en/ods/index.html).
,
This in-circuit emulator serves to debug hardware and software when developing application
systems using the 78K0/Kx2 microcontrollers. It supports to the integrated debugger (ID78K0-
QB). This emulator should be used in combination with a power supply unit and emulation probe,
and the USB is used to connect this emulator to the host machine.
This check pin adapter is used in waveform monitoring using the oscilloscope, etc.
This emulation probe is flexible type and used to connect the in-circuit emulator and target
system.
This exchange adapter is used to perform pin conversion from the in-circuit emulator to target
connector.
This space adapter is used to adjust the height between the target system and in-circuit emulator.
This YQ connector is used to connect the target connector and exchange adapter.
This mount adapter is used to mount the target device with socket.
This target connector is used to mount on the target system.
This is a flash memory programmer dedicated to microcontrollers with on-chip flash
memory. It is available also as on-chip debug emulator which serves to debug hardware
and software when developing application systems using the 78K0/Kx2 microcontrollers.
When using this as flash memory programmer, it should be used in combination with a
connection cable (16-pin cable) and a USB interface cable that is used to connect the
host machine.
16-pin general-purpose connector (2.54 mm pitch)
APPENDIX A DEVELOPMENT TOOLS
925