PIC18F24J10-I/ML Microchip Technology, PIC18F24J10-I/ML Datasheet - Page 25

• Manufacturer Part Number: PIC18F24J10-I/ML
• Description: IC PIC MCU FLASH 8KX16 28QFN
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F24J10-I/ML

• Core Size: 8-Bit
• Program Memory Size: 16KB (8K x 16)
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Controller Family/series: PIC18
• No. Of I/o's: 21
• Ram Memory Size: 1024Byte
• Cpu Speed: 40MHz
• No. Of Timers: 3
• Interface: I2C, SPI, USART
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: SPIC, I2C, EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183032, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164336 - MODULE SOCKET FOR PM3 28/44QFNAC162074 - HEADER INTRFC MPLAB ICD2 44TQFPAC162067 - HEADER INTRFC MPLAB ICD2 40/28P
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

2.0
2.1
Getting started with the PIC18F45J10 family family of
8-bit microcontrollers requires attention to a minimal
set of device pin connections before proceeding with
development.
The following pins must always be connected:
• All V
• All AV
• MCLR pin
• ENVREG (if implemented) and V
These pins must also be connected if they are being
used in the end application:
• PGC/PGD pins used for In-Circuit Serial
• OSCI and OSCO pins when an external oscillator
Additionally, the following pins may be required:
• V
The minimum mandatory connections are shown in
Figure 2-1.
© 2009 Microchip Technology Inc.
(see Section 2.2 “Power Supply Pins”)
not the analog device features are used
(see Section 2.2 “Power Supply Pins”)
(see Section 2.3 “Master Clear (MCLR) Pin”)
(see Section 2.4 “Voltage Regulator Pins
(V
Programming™ (ICSP™) and debugging purposes
(see Section 2.5 “ICSP Pins”)
source is used
(see Section 2.6 “External Oscillator Pins”)
reference for analog modules is implemented
Note:
REF
CAP
DD
+/V
DD
/V
GUIDELINES FOR GETTING
STARTED WITH PIC18FJ
MICROCONTROLLERS
Basic Connection Requirements
and V
DDCORE
REF
and AV
The AV
connected, regardless of whether any of
the analog modules are being used.
- pins used when external voltage
SS
)”)
SS
pins
DD
pins, regardless of whether or
and AV
SS
pins must always be
CAP
/V
DDCORE
pins
PIC18F45J10 FAMILY
FIGURE 2-1:
Key (all values are recommendations):
C1 through C6: 0.1 μF, 20V ceramic
C7: 10 μF, 6.3V or greater, tantalum or ceramic
R1: 10 kΩ
R2: 100Ω to 470Ω
Note 1:
V
DD
C6
R1
C1
(2)
R2
2:
See Section 2.4 “Voltage Regulator Pins
(V
ENVREG pin connections.
The example shown is for a PIC18FJ device
with five V
Other devices may have more or less pairs;
adjust the number of decoupling capacitors
appropriately.
MCLR
V
V
CAP
SS
DD
/V
DDCORE
C5
PIC18FXXJXX
DD
RECOMMENDED
MINIMUM CONNECTIONS
(2)
/V
SS
)” for explanation of
and AV
ENVREG
V
CAP
C4
C2
DD
/V
DS39682E-page 23
DDCORE
(2)
/AV
(2)
V
V
SS
DD
SS
pairs.
(1)
C3
(1)
C7
(2)