EVL6563S-100W STMicroelectronics, EVL6563S-100W Datasheet - Page 10

• Manufacturer Part Number: EVL6563S-100W
• Description: EVAL BOARD FOR L6563(100W)
• Manufacturer: STMicroelectronics
• Type: Power Factor Correctionr

Specifications of EVL6563S-100W

• Main Purpose: Power Management, Power Factor Correction
• Embedded: No
• Utilized Ic / Part: L6563
• Primary Attributes: 100W Power Factor Correction and Preregulator Combination
• Secondary Attributes: Transition Mode & Active Tracking Boost Function.
• Board Size: 90 mm x 83 mm
• Maximum Operating Temperature: + 60 C
• Operating Supply Voltage: 90 V to 265 V
• Product: Power Management Modules
• Dimensions: 90 mm x 83 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: L6563S
• Other names: 497-10490

Test results and significant waveforms
4
4.1
10/33
Figure 3.
Vin = 230 Vac - 50 Hz
Pout = 100 W
THD = 2.31 %
PF = 0.982
Test results and significant waveforms
Harmonic content measurement
One of the main purposes of a PFC pre-conditioner is the correction of input current
distortion, decreasing the harmonic contents below the limits of the relevant regulations.
Therefore, this demonstration board has been tested according to the European standard
EN61000-3-2 Class-D and Japanese standard JEITA-MITI Class-D, at full load at both the
nominal input voltage mains.
The circuit is able to reduce the harmonics well below the limits of both regulations from full
load down (measurements are shown in
measures and waveforms have been done using a Pi-filter for filtering the noise coming from
the circuit, using a 20 mH common-mode choke and two 470NF-X2 filter capacitors.
EVL6563S-100W TM PFC:
compliance to EN61000-3-2
standard
Doc ID 16279 Rev 2
Figure 4.
Vin = 100 Vac - 50 Hz
Pout = 100 W
THD = 2.30 %
PF = 0.999
Figure 3
and 4) to light load. Please note that all
EVL6563S-100W TM PFC:
compliance to JEITA-MITI standard
AN3065