MK21DN512VMC5 Freescale Semiconductor, MK21DN512VMC5 Datasheet - Page 16

• Manufacturer Part Number: MK21DN512VMC5
• Description: ARM Microcontrollers - MCU ARM+512Kb+USB+DryIce
• Manufacturer: Freescale Semiconductor

Specifications of MK21DN512VMC5

• Core: ARM Cortex M4
• Processor Series: MK21DN512
• Data Bus Width: 16 bit/32 bit
• Maximum Clock Frequency: 50 MHz
• Program Memory Size: 512 KB
• Data Ram Size: 64 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 1.71 V to 3.6 V
• Operating Temperature Range: - 40 C to + 105 C
• Package / Case: MAPBGA-121
• Mounting Style: SMD/SMT
• A/d Bit Size: 16 bit
• Interface Type: Serial
• Length: 8 mm
• Maximum Operating Temperature: + 105 C
• Minimum Operating Temperature: - 40 C
• Number Of Timers: 2
• On-chip Dac: Yes
• Program Memory Type: Flash
• Supply Voltage - Max: 3.6 V
• Supply Voltage - Min: 1.71 V

General
4. Max values are measured with CPU executing DSP instructions
5. 25MHz core and system clock, 25MHz bus clock, and 12.5MHz flash clock. MCG configured for FEI mode.
6. 2 MHz core, system, and bus clock and 1MHz flash clock. MCG configured for BLPE mode. All peripheral clocks disabled.
7. 2 MHz core, system, and bus clock and 1MHz flash clock. MCG configured for BLPE mode. All peripheral clocks enabled
8. 2 MHz core, system, and bus clock and 1MHz flash clock. MCG configured for BLPE mode. All peripheral clocks disabled.
9. Includes 32kHz oscillator current and RTC operation.
5.2.5.1 Diagram: Typical IDD_RUN operating behavior
The following data was measured under these conditions:
16
• MCG in FBE mode
• USB regulator disabled
• No GPIOs toggled
• Code execution from flash with cache enabled
• For the ALLOFF curve, all peripheral clocks are disabled except FTFL
Code executing from flash.
but peripherals are not in active operation. Code executing from flash.
Figure 2. Run mode supply current vs. core frequency
K21 Sub-Family Data Sheet Data Sheet, Rev. 3, 08/2012.
Freescale Semiconductor, Inc.