S1D13503 Epson Electronics America, Inc., S1D13503 Datasheet - Page 206

• Manufacturer Part Number: S1D13503
• Description: S1d13503 Graphics Lcd Controller
• Manufacturer: Epson Electronics America, Inc.

Page 4
Comments
Program Messages
S1D13503
X18A-B-005-05
•
•
Power Down Mode xx is set.
The power down mode xx has been set. This message may not be visible if the active display controller is the S1D13503.
ERROR: Cannot set power mode xx!
13503PD.EXE cannot set the power down mode requested - either 13503BIOS.COM is not loaded or the power down
mode number exceeds 2.
ERROR: This program requires 13503BIOS to be loaded!
The program 13503BIOS.COM must be run before 13503PD. Load 13503BIOS and re-run 13503PD.EXE.
13503PD.EXE requires 13503BIOS.COM to be loaded prior to running.
The following power modes are supported:
Mode 0
Mode 1 or 2
Mode 0 operates at full power.
S1D13503 will engage power down mode 1 or 2. The S1D13503 Look-Up Table
will be disabled and all LCD signals are forced low.
Epson Research and Development
13503PD.EXE Power Down Utility
Vancouver Design Center
Issue Date: 01/01/29