ST72324BJ4-auto STMicroelectronics, ST72324BJ4-auto Datasheet - Page 186

• Manufacturer Part Number: ST72324BJ4-auto
• Description: 8-bit MCU for automotive, 3.8 to 5.5V operating range with 16 Kbyte Flash, 10-bit ADC, 4 timers, SPI, SCI
• Manufacturer: STMicroelectronics

Specifications of ST72324BJ4-auto

• Hdflash Endurance: 100 cycles, data retention 20 years
• Clock Sources: crystal/ceramic resonator oscillators, internal RC oscillator and external clock input
• 4 Power Saving Modes: Slow, Wait, Active Halt, and Halt

Device configuration and ordering information
186/198
differ between ROM and Flash.
Customer:
Address:
Contact:
Phone No:
Reference:
The FASTROM/ROM code name is assigned by STMicroelectronics.
FASTROM/ROM code must be sent in .S19 format. .Hex extension cannot be processed.
Device Type/Memory Size/Package (check only one option):
----------------------------------------------------------------------------------------------------------------------------------------------------
FASTROM DEVICE:
----------------------------------------------------------------------------------------------------------------------------------------------------
LQFP44 10x10:
LQFP32 7x17:
----------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------
ROM DEVICE:
----------------------------------------------------------------------------------------------------------------------------------------------------
LQFP44 10x10:
LQFP32 7x7:
----------------------------------------------------------------------------------------------------------------------------------------------------
Conditioning for LQFP package (check only one option):
Temperature range :
Special Marking:
Clock Source Selection:
PLL
LVD reset
Reset delay
Watchdog selection
Halt when Watchdog on
Readout protection
Date
1. PLL must be disabled if internal RC network is selected.
2. The PLL can be enabled only if the resonator is configured to “Medium power: 2~4 MHz”.
CAUTION: The readout protection binary value is inverted between ROM and Flash products. The option byte checksum will
(1)(2)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . .
32K
[ ] ST72P324B(J6)T
[ ] ST72P324B(K6)T
32K
[ ] ST72324B(J6)T
[ ] ST72324B(K6)T
[ ] Tape and Reel
[ ] A (-40°C to +85°C)
[ ] B (-40°C to +105°C)
[ ] C (-40°C to +125°C)
[ ] D (-40°C to +150°C)
[ ] No
[ ] Resonator:
[ ] Internal RC
[ ] External clock (sets MP medium power resonator in option byte)
[ ] Disabled
[ ] Disabled
[ ] Medium threshold
[ ] 256 cycles
[ ] Software activation
[ ] Reset
[ ] Disabled
ST72324B-Auto Microcontroller FASTROM/ROM Option List
[ ] LP: Low power resonator (1 to 2 MHz)
[ ] MP: Medium power resonator (2 to 4 MHz)
[ ] MS: Medium speed resonator (4 to 8 MHz)
[ ] HS: High speed resonator (8 to 16 MHz)
Doc ID13466 Rev 4
(Last update: July 2007)
16K
[ ] ST72P324B(J4)T
[ ] ST72P324B(K4)T
16K
[ ] ST72324B(J4)T
[ ] ST72324B(K4)T
[ ] Tray
[ ] Yes "_ _ _ _ _ _ _ _ _ _ "
LQFP32: 7 characters max. Other packages: 10 characters max.
Authorized characters are letters, digits, '.', '-', '/' and spaces only.
[ ] Enabled
[ ] High threshold
[ ] Low threshold
[ ] 4096 cycles
[ ] Hardware activation
[ ] No reset
[ ] Enabled
Signature . . . . . . . . . . . . . . . .
8K
[ ] ST72P324B(J2)T
[ ] ST72P324B(K2)T
8K
[ ] ST72324B(J2)T
[ ] ST72324B(K2)T
ST72324B-Auto