PEB20534H-10V2.1 Infineon Technologies, PEB20534H-10V2.1 Datasheet - Page 357

• Manufacturer Part Number: PEB20534H-10V2.1
• Description: Communication Controller 208-Pin FQFP
• Manufacturer: Infineon Technologies

Data Sheet
SSCBEN
SSCBE
SSCPEN
SSCPE
SSC Baud Rate Error Enable
This bit selects whether the SSC ignores or checks baud rate errors:
SSCREN
=’0’
SSCREN
=’1’
SSC Baud Rate Status Flag
This bit indicates a baud rate mismatch:
SSCBE=’0’
SSCBE=’1’
SSC Phase Error Enable
This bit selects whether the SSC ignores or checks phase errors:
SSCPEN
=’0’
SSCPEN
=’1’
SSC Baud Rate Status Flag
This bit indicates a phase error:
SSCPE=’0’
SSCPE=’1’
The SSC ignores baud rate errors.
The SSC checks baud rates errors.
No baud rate mismatch is detected.
A baud rate mismatch is detected, i.e. the slaves baudrate
deviates from the expected baud rate more than a factor
of 2 or 0.5.
The SSC ignores phase errors.
The SSC checks phase errors.
No phase error is detected.
A phase error is detected, i.e. a transition occured on the
receive data signal within a guard window around the
sampling clock edge.
357
Detailed Register Description
(configuration mode)
(configuration mode)
(operation mode)
(operation mode)
PEB 20534
PEF 20534
2000-05-30