TXC-06101AILQ Transwitch Corporation, TXC-06101AILQ Datasheet - Page 24

• Manufacturer Part Number: TXC-06101AILQ
• Manufacturer: Transwitch Corporation

Specifications of TXC-06101AILQ

• Operating Temperature (min): -40C
• Operating Temperature Classification: Industrial
• Operating Temperature (max): 85C
• Package Type: PQFP
• Rad Hardened: No
• Lead Free Status / Rohs Status: Not Compliant

Receive Line Side Interface
Transmit Line Side Interface
Terminal Side Interface
DFRI/DFRI
Pin Name
Pin Name
Pin Name
Pin Name
RXLOS
RTCO
RTDO
TLDO
TLCO
RFRI
RLDI
RLCI
Proprietary TranSwitch Corporation Information for use Solely by its Customers
Pin No.
Pin No.
Pin No.
Pin No.
101
28
30
31
32
63
64
22
25
I/O/P(T)
I/O/P(T)
I/O/P(T)
I/O/P(T)
O
O
O
O
I
I
I
I
I
CMOSp Datacom Reference Frame Input: Optional 8 kbit/s
CMOSp Receive Line Frame In: Optional, active Low frame
Type**
CMOS
CMOS
TTLp
Type
Type
Type
CT8
CT8
CT8
CT8
- 24 of 196 -
DATA SHEET
pulse used in Datacom Mode to define the Transmit Ter-
minal start of frame. When in serial Datacom mode this
pin is active Low, otherwise it is active High. When
H4INT = "1", then either the pulse repetition rate must
be 2 kbit/s or the pin is not used.
pulse that occurs during the C1 Byte, Bit 7 time. When
used, it reduces the SEF/OOF exit time from two frames
to one frame. This input is only enabled if STS1 = "0". It
is clocked in on the Rising Edge of RLCI.
Receive Line Data Input: Incoming, serial STS-1 data
which is clocked in on the Rising Edge of RLCI.
Receive Line Clock Input: Incoming 51.84 MHz Clock.
Receive Loss Of Signal: Active Low, external, LOS
indicator. This input is combined with the internal LOS
detectors to produce the RLOS status indicator. The
minimum Low time is 20 ns.
Transmit Line Data Output: Outgoing, serial STS-1
Data which is clocked out on the Falling Edge of TLCO.
Transmit Line Clock Output: Outgoing 51.84 MHz
Clock. When TCLK = "0", it is derived from TTCI/O,
DRCI, or TLCI, depending on mode. When TCLK = "1",
it is derived from TLCI.
Receive Terminal Clock Output: Serial, 51.84 MHz
terminal clock. Depending on the operating modes,
RTCO may be derived from either RLCI or RRCI.
Receive Terminal Data Output: Serial, 51.84 MHz
data. Data is clocked out on the Falling Edges of RTCO.
Name/Function
Name/Function
Name/Function
Name/Function
TXC-06101
Ed. 3, April 2001
TXC-06101-MB
PHAST-1