RN-XV Roving Networks Inc, RN-XV Datasheet - Page 56

• Manufacturer Part Number: RN-XV
• Description: MODULE 802.11B/G 2.4GHZ
• Manufacturer: Roving Networks Inc
• Series: -r

Specifications of RN-XV

• Frequency: 2.4GHz
• Data Rate - Maximum: 54Mbps
• Modulation Or Protocol: 802.11b/g
• Applications: General Purpose
• Power - Output: 12dBm
• Sensitivity: -83dBm
• Voltage - Supply: 3 V ~ 3.7 V
• Current - Receiving: 40mA
• Current - Transmitting: 180mA
• Data Interface: PCB, Through Hole
• Memory Size: -
• Antenna Connector: On-Board, Wire Antenna
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 740-1044; RN-XV-W; RN-XVEE; XVEE

13.1. Built-in HTML Client Modes
WiFly can be setup to automatically post data to and get data from a web server without any external HOST
CPU. The advanced web features are enabled using the “set option format <mask>” command. This is a bit
mapped register. The functions of the bits are described in the table below:
set option format <mask> Bitmapped value.
The wake reason value is described in the table below:
Example:
To automatically send HTML data header, the command is set option format 1
To append sensor data in ASCII hex format, the command is set option format 7
To append ALL key value pairs to sensor data, the command is set option format 11
Bit of Format reg
www.rovingnetworks.com
809 University Avenue
Value
0
1
2
3
4
5
6
7
0
1
2
3
4
Wake Reason
Not defined
Power ON or Hardware Reset (battery install or power up)
Sleep (wake up when sleep timer expired)
SENSOR
Not Defined
Button (On the RN-370 serial adapter)
Software Reboot
Watchdog
Function
Automatically send HTML data header based on broadcast interval.
Send users BINARY data (converted to ASCII hex )
Sample the GPIO and AtoD pins and format to ASCII hex
Appends &id= < value>, where value is the device ID string set with
set opt device <string>
Appends the following key value pairs to the HTTP message:
&rtc=<time>, &mac=<mac addr>, &bss= <mac addr of AP>,
&bat=<battery voltage>, &io=<GPIO in HEX>, &wake=<wake
reason>, &seq=<sequence number>, where time is real time clock
value in message as 32 bit HEX value in format aabbccddeeff,
sequence number is a rolling counter of how many web posts have
been sent.
•
Los Gatos, CA 95032
~ 56 ~
•
Tel [phone]
• [e-mail]
WiFly-RN-UM
WiFly GSX/EZX
5/4/2011