RN-XV Roving Networks Inc, RN-XV Datasheet - Page 22

• Manufacturer Part Number: RN-XV
• Description: MODULE 802.11B/G 2.4GHZ
• Manufacturer: Roving Networks Inc
• Series: -r

Specifications of RN-XV

• Frequency: 2.4GHz
• Data Rate - Maximum: 54Mbps
• Modulation Or Protocol: 802.11b/g
• Applications: General Purpose
• Power - Output: 12dBm
• Sensitivity: -83dBm
• Voltage - Supply: 3 V ~ 3.7 V
• Current - Receiving: 40mA
• Current - Transmitting: 180mA
• Data Interface: PCB, Through Hole
• Memory Size: -
• Antenna Connector: On-Board, Wire Antenna
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 740-1044; RN-XV-W; RN-XVEE; XVEE

set uart mode <value>
set uart tx <0, 1>
NOTE: Due to an issue in the UART hardware, the UART does not support even or odd parity.
www.rovingnetworks.com
809 University Avenue
•
Los Gatos, CA 95032
sets the UART mode register. This is a bit-mapped value.
*NOTE: When a TCP connection is closed, if there is RX data in the
If this setting is enabled (set uart mode 0x10), any unsent RX data is still
in the buffer is flushed when a connection is closed.
Disables or enables the TX pin= PIO10 of the UART. Disable will set
PIO10 to an INPUT with weak pulldown.
UART receiver, it is held until
Bit Position
1) more chars come in, in which case it will get flushed, or
2) no chars come in and a new connection is made, then the chars
will get forwarded.
0
1
2
3
4
~ 22 ~
Function
NOECHO - disables echo of RX data while in
command mode
DATA TRIGGER makes connection on RX data
Reserved for future use
Enable Sleep on RX BREAK signal
UART RX data buffer. See note below for details*
•
Tel [phone]
• [e-mail]
WiFly-RN-UM
WiFly GSX/EZX
5/4/2011