RN-XV Roving Networks Inc, RN-XV Datasheet - Page 29

• Manufacturer Part Number: RN-XV
• Description: MODULE 802.11B/G 2.4GHZ
• Manufacturer: Roving Networks Inc
• Series: -r

Specifications of RN-XV

• Frequency: 2.4GHz
• Data Rate - Maximum: 54Mbps
• Modulation Or Protocol: 802.11b/g
• Applications: General Purpose
• Power - Output: 12dBm
• Sensitivity: -83dBm
• Voltage - Supply: 3 V ~ 3.7 V
• Current - Receiving: 40mA
• Current - Transmitting: 180mA
• Data Interface: PCB, Through Hole
• Memory Size: -
• Antenna Connector: On-Board, Wire Antenna
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 740-1044; RN-XV-W; RN-XVEE; XVEE

7. Status Commands
These commands begin with “show”, and they return the current values of variables in the system. In some
cases, for example IP addresses, the current values are received from the network, and may not match the
stored values.
show battery
show connection
show net <n>
show rssi
show stats
show time
show q <0-7>
show q 0x1<mask> Displays multiple analog interface values at once. The channels displayed are
show io
Function
location
Value
www.rovingnetworks.com
Bit
809 University Avenue
13-16
Fixed
Displays GPIO pin levels status in this HEX format: 8ABC
Displays current battery voltage, (only valid for Roving battery powered product like the
RN-370 and temperature sensors and the ISENSOR-CB)
Example: show i returns 8103 indicates GPIO 0, 1 and 8 are HIGH.
Displays current network status, association, authentication, etc. Optional parameter
displays only the MAC address of the AP currently associated.
Displays current last received signal strength.
Displays current statistics, packet rx/tx counters, etc.
Displays number of seconds since last powerup or reboot
Display the value of the an analog interface pin from 0 to 7. The value returned will be in
the format 8xxxxx where xxxxx is voltage in microvolts sampled on the channel you
request with the 8 in front as a start marker.
controlled by a bit mask, which is proceeded by a 0x1xx where xx mask is the bit mask of
the channels. For example, to read channels 0,1, and 7, send:
show q 0x183
Which returns 8<chan0>, 8<chan1>, 8<chan7>, \r\n
8
Displays connection status in this HEX format: 8XYZ
Channel
9-12
1-13
•
Los Gatos, CA 95032
DNS found
1=resolved
7
~ 29 ~
DNS server
•
contacted
Tel [phone]
1=
6
Authen
1= OK
5
• [e-mail]
WiFly-RN-UM
WiFly GSX/EZX
Assoc
1=OK
4
0= Idle,
1= Connected
3= NOIP
4= Connecting
TCP status
5/4/2011
0-3