STM32W108C8U64TR STMicroelectronics, STM32W108C8U64TR Datasheet - Page 85

• Manufacturer Part Number: STM32W108C8U64TR
• Description: 16/32-BITS MICROS
• Manufacturer: STMicroelectronics
• Series: STM32r

Specifications of STM32W108C8U64TR

• Applications: RF4CE, Remote Control
• Core Processor: ARM® Cortex-M3™
• Program Memory Type: FLASH (64 kB)
• Controller Series: STM32W
• Ram Size: 8K x 8
• Interface: I²C, SPI, UART/USART
• Number Of I /o: 24
• Voltage - Supply: 1.18 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 48-VFQFN Exposed Pad
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

STM32W108C8
9.6.2
9.6.3
A UART character frame contains, in sequence:
●
●
●
●
●
Figure 10
on the options chosen for the character frame, the length of a character frame ranges from 9
to 12 bit times.
Note that asynchronous serial data may have arbitrarily long idle periods between
characters. When idle, serial data (TXD or RXD) is held in the high state. Serial data
transitions to the low state in the start bit at the beginning of a character frame.
Figure 10. UART character frame format
FIFOs
Characters transmitted and received by the UART are buffered in the transmit and receive
FIFOs that are both 4 entries deep (see
SC1_DATA register, it is pushed onto the transmit FIFO. Similarly, when software reads from
the SC1_DATA register, the character returned is pulled from the receive FIFO. If the
transmit and receive DMA channels are used, the DMA channels also write to and read from
the transmit and receive FIFOs.
Figure 11. UART FIFOs
RTS/CTS flow control
RTS/CTS flow control, also called hardware flow control, uses two signals (nRTS and nCTS)
in addition to received and transmitted data (see
receiver to prevent buffer overflow, by signaling an external device when it is and is not
allowed to transmit.
TXD
RXD
The start bit
The least significant data bit
The remaining data bits
If parity is enabled, the parity bit
The stop bit, or bits, if 2 stop bits are selected.
or
RXD
shows the UART character frame format, with optional bits indicated. Depending
Idle time
Receive Shift Register
SC1_DATA (read)
Start
Bit
Data
Bit 0
Data
Bit 1
Doc ID 018587 Rev 1
Parity/Frame Errors
SC1_UARTSTAT
Data
Bit 2
UART Character Frame Format
(optional sections are in italics )
Data
Bit 3
Figure
Data
Bit 4
11). When software writes a character to the
Figure
Data
Bit 5
Transmit Shift Register
Data
Bit 6
SC1_DATA (write)
12). Flow control is used by a data
Data
Bit 7
Parity
Bit
Stop
Bit
TXD
Serial interfaces
Channel Access
Stop
CPU and DMA
Bit
IdleTime
Start Bit
Next
or
85/207