LAN9311-NU SMSC, LAN9311-NU Datasheet - Page 223

• Manufacturer Part Number: LAN9311-NU
• Description: IC ETHER SW 2PRT 16BIT 128-VTQFP
• Manufacturer: SMSC
• Type: Two Port Managed Ethernet Switchr

Specifications of LAN9311-NU

• Controller Type: Ethernet Switch Controller
• Interface: Serial EEPROM
• Voltage - Supply: 3.3V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 128-TQFP, 128-VQFP
• Product: Ethernet Switches
• Number Of Transceivers: 1
• Standard Supported: 802.3, 802.3u
• Data Rate: 10 MB, 100 MB
• Supply Voltage (max): 3.3 V
• Supply Voltage (min): 0 V
• Maximum Operating Temperature: + 70 C
• Ethernet Connection Type: 10 Base-T, 100 Base-TX
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• For Use With: 638-1076 - EVALUATION BOARD LAN9311-NU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Supply: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 638-1075

Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
SMSC LAN9311/LAN9311i
14.2.5.22
BITS
31
30
29
28
27
26
25
24
23
Master/Slave Port 2 (M_nS_2)
When set, Port 2 is a time clock master and captures timestamps when a
Sync packet is transmitted and when a Delay_Req is received. When
cleared, Port 2 is a time clock slave and captures timestamps when a
Delay_Req packet is transmitted and when a Sync packet is received.
Primary MAC Address Enable Port 2 (MAC_PRI_EN_2)
This bit enables/disables the primary MAC address on Port 2.
0: Disables primary MAC address on Port 2
1: Enables MAC address 01:00:5E:00:01:81 as a PTP address on Port 2
Alternate MAC Address 1 Enable Port 2 (MAC_ALT1_EN_2)
This bit enables/disables the alternate MAC address 1 on Port 2.
0: Disables alternate MAC address on Port 2
1: Enables MAC address 01:00:5E:00:01:82 as a PTP address on Port 2
Alternate MAC Address 2 Enable Port 2 (MAC_ALT2_EN_2)
This bit enables/disables the alternate MAC address 2 on Port 2.
0: Disables alternate MAC address on Port 2
1: Enables MAC address 01:00:5E:00:01:83 as a PTP address on Port 2
Alternate MAC Address 3 Enable Port 2 (MAC_ALT3_EN_2)
This bit enables/disables the alternate MAC address 3 on Port 2.
0: Disables alternate MAC address on Port 2
1: Enables MAC address 01:00:5E:00:01:84 as a PTP address on Port 2
User Defined MAC Address Enable Port 2 (MAC_USER_EN_2)
This bit enables/disables the auxiliary MAC address on Port 2. The auxiliary
address is defined via the 1588_AUX_MAC_HI and 1588_AUX_MAC_LO
registers.
0: Disables auxiliary MAC address on Port 2
1: Enables auxiliary MAC address as a PTP address on Port 2
Lock Enable RX Port 2 (LOCK_RX_2)
This bit enables/disables the RX lock. This lock prevents a 1588 capture
from overwriting the Clock, UUDI and Sequence ID values if the 1588 RX
interrupt for Port 2 is already set due to a previous capture.
0: Disables RX Port 2 Lock
1: Enables RX Port 2 Lock
Lock Enable TX Port 2 (LOCK_TX_2)
This bit enables/disables the TX lock. This lock prevents a 1588 capture
from overwriting the Clock, UUDI and Sequence ID values if the 1588 TX
interrupt for Port 2 is already set due to a previous capture.
0: Disables TX Port 2 Lock
1: Enables TX Port 2 Lock
Master/Slave Port 1 (M_nS_1)
When set, Port 1 is a time clock master and captures timestamps when a
Sync packet is transmitted and when a Delay_Req is received. When
cleared, Port 1 is a time clock slave and captures timestamps when a
Delay_Req packet is transmitted and when a Sync packet is received.
1588 Configuration Register (1588_CONFIG)
This read/write register is responsible for the configuration of the 1588 timestamps for all ports.
Offset:
194h
DESCRIPTION
DATASHEET
223
Size:
32 bits
TYPE
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Revision 1.7 (06-29-10)
DEFAULT
0b
1b
0b
0b
0b
0b
1b
1b
0b