SL11R Cypress Semiconductor Corp, SL11R Datasheet - Page 9

• Manufacturer Part Number: SL11R
• Description: IC MCU FULL SPD USB 16B 100LQFP
• Manufacturer: Cypress Semiconductor Corp

Specifications of SL11R

• Applications: USB Microcontroller
• Core Processor: RISC
• Program Memory Type: Mask ROM (6 kB)
• Controller Series: USB Controller
• Ram Size: 3Kx8
• Interface: 2-Wire Serial, UART, USB
• Number Of I /o: 32
• Voltage - Supply: 3 V ~ 3.6 V
• Operating Temperature: 0°C ~ 65°C
• Mounting Type: Surface Mount
• Package / Case: 100-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 428-1462

Document #: 38-08006 Rev. **
• Up to 32 bits of General Purpose I/O (GPIO)
• 6Kx8 internal Mask ROM with built-in BIOS in supporting a comprehensive list of interrupt calls (see [Ref. 1] SL11R_BIOS for
• 3Kx8 internal RAM that can be configured as the USB Ping-Pong buffer for USB DATA0 and DATA1 packets. It also can be
• Two-wire serial EEPROM interface port with SL11R BIOS support to allow on-board EEPROM programming
• Flexible Programmable external memory wait-states and a 8/16 data path
• Up to 16-bit address for Extended Memory Interface Port for External SRAM and ROM
• On chip DRAM Controller
• On chip fast EPP Interface
• On chip 8/16-bit DMA data path interface
• Supports 12 MHz/48MHz external crystal or clock
• Executable code or data can be loaded either from the USB port or via the UART port. The code/data is moved to RAM for
• USB Port (12 Mbits/sec), including a built-in USB transceiver. All USB standard protocol modes are supported: Isochronous
• There are four available Endpoints. Each endpoint utilizes a bidirectional DMA port to move data between the Memory and
• Two General Purpose Timers, a Watchdog timer (WDT), four programmable PWM channels, and four Programmable Timing
• Four PWM or Programmable Timing Generator output channels are available. Each channel provides a programmable timing
• Suspend/Resume and Low Power modes are supported
• UART interface supports from 900 Baud to 115.2K Baud
• USB Generic Mini-Port Driver for WIN98/2000 is available
• Debugger and QT-Assembler are available
• “C” Compiler option available
• Package: 100 LPQFP
• Power requirements 3.3V
detailed information). These include USB functions, 2-wire serial interface, and UART and Boot-Up options (Boot-up from
2-wire serial interface or External ROM). Executable code can also run from 8-bit or 16-bit external Memory.
used for data and/or code.
debugging purposes (using a break point register), or to be programmed via a two-wire serial EEPROM.
mode (up to 1024 packet size), Bulk, Interrupt, and Control modes.
the USB. Data can be sent/received to/from the Data Port Independently.
Generator outputs
generator sequence that can be used to interface to various CCD, CIS, and CMOS image sensors, or can be used for other
types of applications.
Page 9 of 85
SL11R