ISP1564HLUM STEricsson, ISP1564HLUM Datasheet - Page 14

• Manufacturer Part Number: ISP1564HLUM
• Manufacturer: STEricsson

Specifications of ISP1564HLUM

• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (min): 3V
• Operating Supply Voltage (max): 3.6V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 100
• Lead Free Status / Rohs Status: Compliant

NXP Semiconductors
ISP1564_1
Product data sheet
8.1.1 PCI configuration space
8.1.2 PCI initiator and target
8.2 PCI configuration registers
Each function has its own configuration space. The PCI enumerator must allocate the
memory address space for each of these functions. Power management is implemented
in each PCI function and all power states are provided. This allows the system to achieve
low power consumption by switching off the functions that are not required.
PCI Local Bus Specification Rev. 2.2 requires that each of the two PCI functions of the
ISP1564 provides its own PCI configuration registers, which can vary in size. In addition to
the basic PCI configuration header registers, these functions implement capability
registers to support power management.
The registers of each of these functions are accessed by the respective driver.
provides a detailed description of various PCI configuration registers.
A PCI initiator initiates PCI transactions to the PCI bus. A PCI target responds to PCI
transactions as a slave. In the ISP1564, the open Host Controller and the enhanced Host
Controller function as both initiators or targets of PCI transactions issued by the host CPU.
All USB Host Controllers have their own operational registers that can be accessed by the
system driver software. Drivers use these registers to configure the Host Controller
hardware system, issue commands to it, and monitor the status of the current hardware
operation. The Host Controller plays the role of a PCI target. All operational registers of
the Host Controllers are the PCI transaction targets of the CPU.
Normal USB transfers require the Host Controller to access system memory fields, which
are allocated by USB HCDs and PCI drivers. The Host Controller hardware interacts with
the HCD by accessing these buffers. The Host Controller works as an initiator in this case
and becomes a PCI master.
OHCI USB Host Controllers and the EHCI USB Host Controller contain two sets of
software-accessible hardware registers: PCI configuration registers and memory-mapped
Host Controller registers.
A set of configuration registers is implemented for each of the two PCI functions of the
ISP1564, see
Remark: In addition to the normal PCI header, from offset index 00h to 3Fh,
implementation-specific registers are defined to support power management and
function-specific features.
The HCD does not usually interact with the PCI configuration space. The configuration
space is used only by the PCI enumerator to identify the USB Host Controller and assign
appropriate system resources by reading the Vendor ID (VID) and the Device ID (DID).
Table
3.
Rev. 01 — 4 December 2006
HS USB PCI Host Controller
© NXP B.V. 2006. All rights reserved.
ISP1564
Section 8.2
13 of 99