CS1W-CRM21 Omron, CS1W-CRM21 Datasheet - Page 49

• Manufacturer Part Number: CS1W-CRM21
• Description: CS1 CompoNet Master
• Manufacturer: Omron

Specifications of CS1W-CRM21

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

1-4-2
1-4-2
Connecting CJ-series CJ2 CPU Units, CP-series PLCs and
NSJ-series Controllers Using Commercially Available USB
Cable
Connecting CJ-series CJ2 CPU Units, CP-series PLCs and NSJ-series Controllers
Restrictions when Connecting by USB
CJ-series CJ2 CPU Units
A computer running the CX-One can be connected to the peripheral USB port on a
CJ-series CJ2 CPU Units or a CP-series PLC or to the USB connector (SLAVE) on an
NSJ-series Controller using commercially available USB cable. The procedures are
provided in this section.
Due to USB specifications, the following restrictions apply when connecting a
computer running Support Software.
• A USB connection is possible for only one CP-series PLC from a single computer. It
• Do not disconnect the USB cable while the Support Software is connected online.
The peripheral USB port (conforming to USB 1.1, B connector) is a dedicated port for
connecting Support Software, such as the CX-Programmer.
is not possible to connect multiple CP-series PLCs or an NSJ-series Controller
simultaneously.
Before disconnecting the USB cable, be sure to place the application in offline status.
If the USB cable is disconnected while online, the situations described below will
occur.
The Support Software cannot be returned to online status by simply reconnecting the
USB cable. First return the Support Software to offline status, and then reconnect the
USB cable. Then perform the online connection procedure for the Support Software.
Commercially
available USB
cable
Using Commercially Available USB Cable
1-4
PLC Connecting Cables
1-21