8808A/SU 120V Fluke Electronics, 8808A/SU 120V Datasheet - Page 28

• Manufacturer Part Number: 8808A/SU 120V
• Description: USB CABLE KIT SW DMM 5.5 RES
• Manufacturer: Fluke Electronics
• Type: Digital (DMM)r

Specifications of 8808A/SU 120V

• Includes: Test Leads
• Style: Bench
• Display Digits: 5.5
• Display Type: VFD, Dual
• Display Count: 200000
• Function: Voltage, Current, Resistance, Frequency
• Functions, Extra: Continuity, dB, Diode Test
• Features: Hold, Min/Max, RS-232 Port
• Ranging: Auto/Manual
• Response: True RMS
• Lead Free Status / RoHS Status: Not applicable / RoHS non-compliant
• Other names: 614-1069

8808A
Users Manual
2-4
Selecting the Line Voltage
Replacing the Fuses
Line-Power Fuse
The Meter operates on four different input line voltages. The selected line-voltage setting
is visible through the window in the line-fuse holder on the Meter’s rear panel.
Changing the line-voltage setting may require a different line-power fuse for proper
operation.
The Meter uses one fuse to protect the line-power input and two fuses to protect the
current-measurement inputs.
The Meter has a line-power fuse in series with the power supply. Table 2-1 indicates the
proper fuse for each of the four line-voltage selections. The line-power fuse is accessed
through the rear panel.
To avoid electric shock or fire, do not use makeshift fuses or
short-circuit the fuse holder.
1. Unplug the power cord.
2. Insert a small screwdriver blade into the narrow recess to the left of the fuse
3. Remove the voltage-selector block from the fuse holder.
4. Rotate the selector block until the desired voltage rating faces outward.
5. Replace the selector block back into the fuse holder.
6. Install the fuse holder back into the Meter and reconnect the power cord.
1. Unplug the power cord.
2. Insert a small screwdriver blade into the narrow recess to the left of the fuse
3. Remove the fuse and replace it with a fuse of an appropriate rating for the
4. Replace the selector block back into the fuse holder.
Line Voltage Selection
holder and pry it to the right until the holder pops out. See Figure 2-1.
holder and pry it to the right until the holder pops out. See Figure 2-1.
selected line-power voltage. See Table 2-1.
100 / 120
220 / 240
Table 2-1. Line Voltage to Fuse Rating
XW Warning
0.125 A, 250 V (slow blow)
0.063 A, 250 V (slow blow)
Fuse Rating