EP9307-CR Cirrus Logic Inc, EP9307-CR Datasheet - Page 469

• Manufacturer Part Number: EP9307-CR
• Description: IC,MICROPROCESSOR,32-BIT,CMOS,BGA,272PIN,PLASTIC
• Manufacturer: Cirrus Logic Inc
• Series: EP9r

Specifications of EP9307-CR

• Rohs Compliant: NO
• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, Ethernet, I²C, IrDA, Keypad/Touchscreen, SPI, UART/USART, USB
• Peripherals: AC'97, DMA, I&sup2:S, LCD, LED, MaverickKey, POR, PWM, WDT
• Number Of I /o: 14
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 272-TFBGA
• Processor Series: EP93xx
• Core: ARM920T
• Data Bus Width: 32 bit
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: EDB9307A-Z
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With: 598-1133 - KIT DEVELOPMENT EP9307 ARM9
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: No
• Other names: 598-1254

HcRhDescriptorB
DS785UM1
31
15
Address:
30
14
29
13
28
12
NPS:
DT:
OCPM:
NOCP:
P:
0x8002_004C
27
11
26
10
RSVD
RSVD
Copyright 2007 Cirrus Logic
25
9
NoPowerSwitching. These bits are used to specify
whether power switching is supported or port are always
powered. It is implementation-specific. When this bit is
cleared, the PowerSwitchingMode specifies global or per-
port switching.
0: Ports are power switched
1: Ports are always powered on when the HC is powered
on.
DeviceType. This bit specifies that the Root Hub is not a
compound device. The Root Hub is not permitted to be a
compound device. This field should always read/write 0.
OverCurrentProtectionMode. This bit describes how the
overcurrent status for the Root Hub ports are reported. At
reset, this fields should reflect the same mode as
PowerSwitchingMode. This field is valid only if the
NoOverCurrentProtection field is cleared.
0: Over-current status is reported collectively for all
downstream ports
1: Over-current status is reported on a per-port basis.
NoOverCurrentProtection. This bit describes how the
overcurrent status for the Root Hub ports are reported.
When this bit is cleared, the OverCurrentProtectionMode
field specifies global or per-port reporting.
0: Over-current status is reported collectively for all
downstream ports
1: No overcurrent protection supported
PowerOnToPowerGoodTime. This byte specifies the
duration HCD has to wait before accessing a powered-on
port of the Root Hub. It is implementation-specific. The unit
of time is 2 ms. The duration is calculated as P[7:0] * 2 ms.
0x05 = 10 ms
24
8
23
7
22
6
21
5
Universal Serial Bus Host Controller
20
4
19
3
EP93xx User’s Guide
18
2
PPCM
DR
17
1
11-29
16
0
11