XBP09-DPSIT-156 Digi International, XBP09-DPSIT-156 Datasheet - Page 22

• Manufacturer Part Number: XBP09-DPSIT-156
• Description: MODULE XBEE PRO W/RPSMA
• Manufacturer: Digi International
• Series: XBEE-PRO™r

Specifications of XBP09-DPSIT-156

• Frequency: 902MHz ~ 928MHz
• Data Rate - Maximum: 156kbps
• Modulation Or Protocol: FHSS
• Applications: ISM
• Power - Output: 17dBm (50mW)
• Sensitivity: -100dBm
• Voltage - Supply: 3 V ~ 3.6 V
• Current - Receiving: 80mA
• Current - Transmitting: 210mA
• Data Interface: PCB, Through Hole
• Antenna Connector: RP-SMA
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 602-1169

XBee‐PRO® 900 RF Modules
Module Pin Names
CommissioningButton
AD0 / DIO0 /
See the command table for more information. Pullup resistors for each digital input can be enabled
using the PR command.
If the IS command is issued from AT command mode then a carriage return delimited list will be
returned containing the above-listed fields. If the command is issued via an API frame then the
module will return an AT command response API frame with the IO data included in the command
data portion of the packet.
Example
0x0C0C\r
0x03D0\r
0x0408\r
1
2
1
Variable Sampled Data Set
© 2009 Digi International, Inc.
0x01\r
0x03\r
Sample Sets
Digital Channel Mask
Analog Channel Mask
[Analog Inputs: A/D 0, 1 enabled]
[Digital Inputs: DIO 2, 3, 10, 11
[Digital input states: DIO 3, 10
[Analog input ADIO 0= 0x3D0]
Module Pin Number
Sample AT Response
high, DIO 2, 11 low]
[1 sample set]
Number of sample sets in the packet. (Always set to 1.)
Indicates which digital IO lines have sampling enabled. Each bit corresponds to one
digital IO line on the module.
For example, a digital channel mask of 0x002F means DIO0,1,2,3, and 5 are enabled
as digital IO.
Indicates which lines have analog inputs enabled for sampling. Each bit in the analog
channel mask corresponds to one analog input channel.
If any digital IO lines are enabled, the first two bytes of the data set indicate the state
of all enabled digital IO. Only digital channels that are enabled in the Digital Channel
Mask bytes have any meaning in the sample set. If no digital IO are enabled on the
device, these 2 bytes will be omitted.
Following the digital IO data (if any), each enabled analog channel will return 2 bytes.
The data starts with AIN0 and continues sequentially for each enabled analog input
channel up to AIN5.
enabled]
20
• bit 0 = AD0/DIO0
• bit 1 = AD1/DIO1
• bit 2 = AD2/DIO2
• bit 3 = AD3/DIO3
• bit 4 = DIO4
• bit 5 = ASSOC/DIO5
• bit 6 = RTS/DIO6
• bit 7 = CTS/GPIO7
• bit 8 = DTR / SLEEP_RQ / DIO8
• bit 9 = ON_SLEEP / DIO9
• bit 10 = RSSI/DIO10
• bit 11 = PWM/DIO11
• bit 12 = CD/DIO12
• bit 0 = AD0/DIO0
• bit 1 = AD1/DIO1
• bit 2 = AD2/DIO2
• bit 3 = AD3/DIO3
• bit 4 = AD4/DIO4
• bit 5 = ASSOC/AD5/DIO5
Configuration Command
D0
22