TDA5251 Infineon Technologies, TDA5251 Datasheet - Page 20

• Manufacturer Part Number: TDA5251
• Description: TXRX FSK/ASK SGL LP TSSOP-38
• Manufacturer: Infineon Technologies
• Type: Transceiverr

Specifications of TDA5251

• Package / Case: 38-TSSOP
• Frequency: 315MHz
• Data Rate - Maximum: 64kbps
• Modulation Or Protocol: ASK, FSK
• Applications: RKE, Remote Control Systems
• Power - Output: 13dBm
• Sensitivity: -109dBm
• Voltage - Supply: 2.1 V ~ 5.5 V
• Current - Receiving: 9.3mA
• Current - Transmitting: 14mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Operating Frequency: 0.35 MHz
• Operating Supply Voltage: 2.5 V, 3.3 V, 5 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Product Depth (mm): 4.4mm
• Product Length (mm): 9.7mm
• Operating Supply Voltage (min): 2.1V
• Operating Supply Voltage (max): 5.5V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Compliant
• Other names: SP000014554; TDA5251; TDA5251INTR; TDA5251XT

2.4.7
The I/Q Limiters are DC coupled multistage amplifiers with offset-compensating feedback circuit
and an overall gain of approximately 80dB each in the frequency range of 100Hz up to 350kHz.
Receive Signal Strength Indicator (RSSI) generators are included in both limiters which produce DC
voltages that are directly proportional to the input signal level in the respective channels. The
resulting I- and Q-channel RSSI-signals are summed to the nominal RSSI signal.
2.4.8
The output differential signals of the I/Q limiters are fed to a quadrature correlator circuit that is used
to demodulate frequency shift keyed (FSK) signals. The demodulator gain is 2.4mV/kHz, the
maximum frequency deviation is ±300kHz as shown in Figure 2-4 below.
The demodulated signal is applied to the ASK/FSK mode switch which is connected to the input of
the data filter. The switch can be controlled by the ASKFSK pin (pin 4) and via the D11 bit in the
CONFIG register.
The modulation index m must be significantly larger than 2 and the deviation at least larger than
25kHz for correct demodulation of the signal.
Figure 2-4
Data Sheet
I/Q Limiters
FSK Demodulator
1,6
1,5
1,4
1,3
1,2
1,1
0,9
0,8
0,7
0,6
0,5
1
-350 -300 -250 -200 -150 -100 -50
Quadricorrelator Demodulation Characteristic
20
f /kHz
0
50
100 150 200 250 300 350
Functional Description
TDA5251 F1
Version 1.1
Qaudricorrelator.wmf
2007-02-26