DVK-PRM112 Laird Technologies, DVK-PRM112 Datasheet - Page 53

• Manufacturer Part Number: DVK-PRM112
• Description: KIT FOR PRM112
• Manufacturer: Laird Technologies
• Series: FlexRF™r
• Type: Transceiver, FHSSr

Specifications of DVK-PRM112

• Frequency: 2.4GHz
• Output Power: 50 mW
• Antenna: U.FL Coaxial
• Silicon Manufacturer: Laird Technologies
• Kit Application Type: Communication & Networking
• Application Sub Type: RF Module
• Kit Contents: 2x RF Module, 2x Adapter Board, CD, 2x AC Power Adapters, 2x DB9
• Rohs Compliant: Yes
• For Use With/related Products: PRM112
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

LT2510
Wireless Module
LT2510 FIRMWARE
HISTORY
50
global
Americas: +1.800.492.2320
Europe: +44.1628.858.940
Asia: +852.2268.6567
[e-mail]
www.lairdtech.com/wireless
solutions:
local
support
FW 1.9
FW2.0
FW 2.1
FW 2.4-1
• Corrected issue with Deep Sleep command where the module would sometimes remain awake after issuing the command.
• Corrected issue with FIFO buffer which could have resulted in lost packets when using Broadcast transmissions.
• Added hop delineation for transmissions
• Moved 485 timers from Auto Config when Address 0x57 bit 5 is set.
• Added Auto Destination on Beacon only. By default the Auto Destination feature will address the transceiver to the last packet it received,
• Added Sleep Timer Mode
• Added Remote I/O Mode
• Added Beacon Skip
• Added Discard Framing Error Packets
• Corrected 9-bit issues which only permitted 9-bit to work with mark and space parity
• Fully implemented sleep modes
• Eliminated bottleneck between TX serial interface and RF receive buffer
• Added Auto Destination on Beacons Only
• Removed RS485 DE/RE timing control from Auto Config and moved to its own control
• Added Hop Packet Delineation
• Added Sniff Report
• Added Sleep Pin Indicator
• Added Status Request Error Report command
whether it is a beacon from the server or a data packet sent from any radio. By setting Address 0x56 Bit 7, the module will only auto destination
based on the beacon from the server.
TM