LPC3180FEL320/01,5 NXP Semiconductors, LPC3180FEL320/01,5 Datasheet - Page 17

• Manufacturer Part Number: LPC3180FEL320/01,5
• Description: IC ARM9 MCU 208MHZ 320-LFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC3000r

Specifications of LPC3180FEL320/01,5

• Package / Case: 320-LFBGA
• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 208MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, UART/USART, USB OTG
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 55
• Program Memory Type: ROMless
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 1.1 V ~ 3.3 V
• Data Converters: A/D 3x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC31
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 208 MHz
• Operating Supply Voltage: 1.8 V / 3V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: OM10096
• Minimum Operating Temperature: - 40 C
• Package: 320LFBGA
• Device Core: ARM926EJ-S
• Family Name: LPC3100
• Maximum Speed: 208 MHz
• Number Of Programmable I/os: 55
• Interface Type: I2C/SPI/UART/USB
• On-chip Adc: 3-chx10-bit
• Number Of Timers: 2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 622-1018 - EVAL KIT FOR LP3180568-4063 - KIT DEV LPC3180568-4062 - DEBUGGER J-LINK JTAG568-4061 - DEBUGGER U-LINK2 JTAG FOR NXP
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4529; 935286983551

NXP Semiconductors
LPC3180_01_1
Preliminary data sheet
6.10.1 Features
6.11.1 Features
6.10 General purpose parallel I/O
6.11 10-bit ADC
status and masked interrupt status registers allow versatile condition evaluation. In
addition to peripheral functions, each of the six general purpose input/output pins and
11 general purpose input pins are connected directly to the interrupt controller.
Some device pins that are not dedicated to a specific peripheral function have been
designed to be general purpose inputs, outputs, or I/Os. Also, some pins may be
configured either as a specific peripheral function or a general purpose input, output, or
I/O. A total of 55 pins can potentially be used as general purpose input/outputs, general
purpose outputs, and general purpose inputs.
GPIO pins may be dynamically configured as inputs or outputs. Separate registers allow
setting or clearing any number of GPIO and GPO outputs controlled by that register
simultaneously. The value of the output register for standard GPIOs and GPO pins may
be read back, as well as the current actual state of the port pins.
There are 12 GPI, 24 GPO, and six GPIO pins. When the SDRAM bus is configured for
16 data bits, 13 of the remaining SDRAM data pins may be used as GPIOs.
The ADC is a three channel, 10-bit successive approximation ADC. The ADC may be
configured to produce results with a resolution anywhere from 10 bits to 3 bits. When high
resolution is not needed, lowering the resolution can substantially reduce conversion time.
The analog portion of the ADC has its own power supply to enhance the low noise
characteristics of the converter. This voltage is only supplied internally when the core has
voltage. However, the ADC block is not affected by any difference in ramp-up time for
VDD_AD and VDD_CORE voltage supplies.
•
•
•
•
•
•
•
•
•
•
Bit-level set and clear registers allow a single instruction set or clear of any number of
bits in one port.
A single register selects direction for pins that support both input and output modes.
Direction control of individual bits.
For input/output pins, both the programmed output state and the actual pin state can
be read.
There are a total of 12 general purpose inputs, 24 general purpose outputs, and six
general purpose input/outputs.
Additionally, 13 SDRAM data lines may be used as GPIOs if a 16-bit SDRAM
interface is used (rather than a 32-bit interface).
Measurement range of 0 V to VDD_AD28 (nominally 3 V).
Low noise ADC.
Maximum 10-bit resolution, resolution can be reduced to any amount down to 3 bits
for faster conversion.
Three input channels.
Rev. 00.08 — 20 November 2008
16/32-bit ARM microcontroller with external memory interface
LPC3180/01
© NXP B.V. 2008. All rights reserved.
17 of 56