LPC2939FBD208,551 NXP Semiconductors, LPC2939FBD208,551 Datasheet - Page 57

• Manufacturer Part Number: LPC2939FBD208,551
• Description: IC ARM9 MCU FLASH 768KB 208-LQFP
• Manufacturer: NXP Semiconductors
• Series: LPC2900r

Specifications of LPC2939FBD208,551

• Core Processor: ARM9
• Core Size: 32-Bit
• Speed: 125MHz
• Connectivity: CAN, EBI/EMI, I²C, LIN, SPI, UART/USART, USB, USB OTG
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 152
• Program Memory Size: 768KB (768K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 16K x 8
• Ram Size: 56K x 8
• Voltage - Supply (vcc/vdd): 1.71 V ~ 3.6 V
• Data Converters: A/D 24x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-LQFP
• Processor Series: LPC29
• Core: ARM968E-S
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: OM11027
• Package: 208LQFP
• Device Core: ARM968E-S
• Family Name: LPC2900
• Operating Supply Voltage: 1.8|3.3 V
• Data Bus Width: 16|32 Bit
• Number Of Programmable I/os: 160
• Interface Type: CAN/I2C/LIN/QSPI/UART/USB
• On-chip Adc: 24-chx10-bit
• Number Of Timers: 6
• For Use With: 568-4787 - BOARD EVAL LPC2939
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935287113551

NXP Semiconductors
LPC2939_3
Product data sheet
Fig 15. Block diagram of the CGU1
BASE_ICLK0_CLK
BASE_ICLK1_CLK
6.16.3.1 Pin description
6.16.3 Clock generation for USB (CGU1)
6.16.4 Reset Generation Unit (RGU)
The CGU1 block is functionally identical to the CGU0 block and generates two clocks for
the USB interface and a dedicated output clock. The CGU1 block uses its own PLL and
fractional divider. The PLLs used in CGU0 and CGU1 are identical (see
The clock input to the CGU1 PLL is provided by one of two base clocks generated in the
CGU0: BASE_ICLK0_CLK or BASE_ICLK1_CLK. The base clock not used for the PLL
can be configured to drive the output clock directly.
The CGU1 module in the LPC2939 has the pins listed in
Table 29.
The RGU controls all internal resets.
The key features of the Reset Generation Unit (RGU) are:
Symbol
CLK_OUT
•
•
PLL
CLOCK GENERATION UNIT
Reset controlled individually per subsystem
Automatic reset stretching and release
clkout
clkout120
clkout240
(CGU1)
CGU1 pins
All information provided in this document is subject to legal disclaimers.
Direction
OUT
AHB TO DTL BRIDGE
Rev. 03 — 7 April 2010
FDIV0
Description
clock output
ARM9 microcontroller with CAN, LIN, and USB
Table 28
OUT 0
OUT 1
OUT 2
below.
LPC2939
© NXP B.V. 2010. All rights reserved.
Section
BASE_USB_CLK
BASE_USB_I2C_CLK
BASE_OUT_CLK
002aae148
6.16.2.2).
57 of 99