Z8F083ASJ020EG Zilog, Z8F083ASJ020EG Datasheet - Page 43

• Manufacturer Part Number: Z8F083ASJ020EG
• Description: IC ENCORE XP MCU FLASH 8K 28SOIC
• Manufacturer: Zilog
• Series: Encore!®r

Specifications of Z8F083ASJ020EG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 20MHz
• Peripherals: Brown-out Detect/Reset, LED, POR, PWM, WDT
• Number Of I /o: 23
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 28-SOIC (7.5mm Width)
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 23
• Number Of Timers: 2
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• For Use With: 770-1002 - ISP 4PORT ZILOG Z8 ENCORE! MCU269-4672 - KIT DEVELOPMENT F083A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4558-5

®
Z8 Encore!
F083A Series
Product Specification
31
POR—Power-On Reset indicator
This bit is set to 1 if a POR event occurs and is reset to 0, if a WDT time-out or Stop Mode
Recovery occurs. Reading this register also resets this bit to 0.
STOP—Stop Mode Recovery indicator
This bit is set to 1 if a Stop Mode Recovery occurs. If the STOP and WDT bits are both set
to 1, the Stop Mode Recovery occurs because of a WDT time-out. If the STOP bit is 1 and
the WDT bit is 0, the Stop Mode Recovery is not caused by a WDT time-out. This bit is
reset by a POR or a WDT time-out that occurred while not in STOP mode. Reading this
register also resets this bit.
WDT—Watchdog Timer time-out indicator
This bit is set to 1 if a WDT time-out occurs. A POR resets this pin. A Stop Mode
Recovery from a change in an input pin also resets this bit. Reading this register resets this
bit. This read must occur before clearing the WDT interrupt.
EXT—External reset indicator
If this bit is set to 1, a reset initiated by the external RESET pin occurred. A POR or a Stop
Mode Recovery from a change in an input pin resets this bit. Reading this register resets
this bit.
Reserved—Must be 0.
PS026308-1207
Reset and Stop Mode Recovery