Z8F083ASJ020EG Zilog, Z8F083ASJ020EG Datasheet - Page 131

• Manufacturer Part Number: Z8F083ASJ020EG
• Description: IC ENCORE XP MCU FLASH 8K 28SOIC
• Manufacturer: Zilog
• Series: Encore!®r

Specifications of Z8F083ASJ020EG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 20MHz
• Peripherals: Brown-out Detect/Reset, LED, POR, PWM, WDT
• Number Of I /o: 23
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 28-SOIC (7.5mm Width)
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 23
• Number Of Timers: 2
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• For Use With: 770-1002 - ISP 4PORT ZILOG Z8 ENCORE! MCU269-4672 - KIT DEVELOPMENT F083A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4558-5

Flash Option Bits
Operation
PS026308-1207
Option Bit Configuration by Reset
Programmable Flash option bits allow user configuration of certain aspects of Z8 Encore!
F083A Series operation. The feature configuration data is stored in the Flash program
memory and read during reset. The features available for control through the Flash option
bits are:
•
•
•
•
•
•
•
Each time the Flash option bits are programmed or erased, the device must be reset for the
change to be effective. During any Reset operation (system reset, or Stop Mode
Recovery), the Flash option bits are automatically read from the Flash program memory
and written to option configuration registers. The option configuration registers, control
the operation of the devices within the Z8 Encore! F083A Series. Option bit control is
established before the device exits reset and the eZ8 CPU begins code execution. The
option configuration registers are not part of the Register File and are not accessible for
read or write access.
Watchdog Timer time-out response selection–interrupt or system reset.
Watchdog Timer enabled at reset.
The ability to prevent unwanted read access to user code in program memory.
The ability to prevent accidental programming and erasure of all or a portion of the user
code in program memory.
VBO configuration always enabled or disabled during STOP mode to reduce STOP mode
power consumption.
OSCILLATOR mode selection for high, medium, and low power crystal oscillators, or
external RC oscillator.
Factory trimming information for the internal precision oscillator and VBO voltage.
Z8 Encore!
Product Specification
®
F083A Series
Flash Option Bits
119