M30833FJGP#U3 Renesas Electronics America, M30833FJGP#U3 Datasheet - Page 514

• Manufacturer Part Number: M30833FJGP#U3
• Description: IC M32C/83 MCU FLASH 100LQFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M32C/80r

Specifications of M30833FJGP#U3

• Core Processor: M32C/80
• Core Size: 16/32-Bit
• Speed: 32MHz
• Connectivity: CAN, I²C, IEBus, SIO, UART/USART
• Peripherals: DMA, WDT
• Number Of I /o: 85
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 31K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 26x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LQFP
• Package: 100LQFP
• Family Name: R8C
• Maximum Speed: 32 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 87
• Interface Type: UART
• On-chip Adc: 26-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 11
• For Use With: R0K330879S001BE - KIT DEV RSK M32C/87R0K330879S000BE - KIT DEV RSK M32C/87
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Rev.
1.01
REVISION HISTORY
2002-12
Date
Page
137
154
163
174
264
All
23
65
88
Full-fledged revision
• Modify the notation system of registers and bits
Reset
• Delete the figure “Device’s internal status after a reset is cleared”.
System Clock
• Modify the figure “Clock Generation Circuit”.
• Add descriptions about the ‘PLL clock’.
• Modify the figure “Status Transition”.
Interrupt
• Modify the figure “Intelligent I/O Interrupt and CAN Interrupt”.
• Add tables ‘registers to be used and settings’.
• Change symbols of the bits in the interrupt request register.
• Change symbols of the bits in the interrupt enable register.
Timer A
• Modify the figure “Timer A Configuration”.
• Add tables ‘registers to be used and settings’.
Timer B
• Modify the figure “Timer B Configuration”.
• Add tables ‘registers to be used and settings’.
Three-Phase Control Timer Function
• Change the bit name, the ‘INV17bit’ in the INVC1 register to reserved bit.
Serial I/O
• Modify the figure “UARTi Block Diagram”.
• Add the table ‘registers to be used and settings’ in each mode.
• Add distributions about the ‘clock-divided synchronous function (GCI mode)’.
• Add descriptions about the ‘bus conflict detect function (IE mode)’.
Intelligent I/O
• Modify the figure “Intelligent I/O Group 0 Block Diagram”.
• Modify the figure “Intelligent I/O Group 1 Block Diagram”.
• Modify the figure “Intelligent I/O Group 2 Block Diagram”.
• Modify the figure “Intelligent I/O Group 3 Block Diagram”.
• Add the table ‘registers and settings’ associated with each function and mode.
• Add a bit function of ‘the BCK0 to BCK1 bit in the G0BCR0 to G3BCR0 register’.
• Add descriptions about the ‘HDLC data processing mode’. -Group 0 and 1
• Add distributions about the ‘IEBus mode’. -Group2
• Add descriptions about the ‘8-bit and 16-bit clock synchronous serial I/O
-Group 0 and 1
function’.
M32C/83 GROUP (M32C/83, M32C/83T) Hardware Manual
-Group3
C-1
Description
Summary