AT89C51ID2-RLTUM Atmel, AT89C51ID2-RLTUM Datasheet - Page 109

• Manufacturer Part Number: AT89C51ID2-RLTUM
• Description: IC 8051 MCU FLASH 64K 44VQFP
• Manufacturer: Atmel
• Series: 89Cr

Specifications of AT89C51ID2-RLTUM

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 60MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 34
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Processor Series: AT89x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: UART, SPI, TWI
• Maximum Clock Frequency: 60 MHz
• Number Of Programmable I/os: 34
• Number Of Timers: 3
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Minimum Operating Temperature: - 40 C
• Package: 44VQFP
• Device Core: 8051
• Family Name: 89C
• Maximum Speed: 40 MHz
• Height: 1.45 mm
• Length: 10.1 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.7 V
• Width: 10.1 mm
• For Use With: AT89OCD-01 - USB EMULATOR FOR AT8XC51 MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Converters: -
• Lead Free Status / Rohs Status: Details

ONCE
Chip Emulation)
4289C–8051–11/05
(TM)
Mode (ON
The ONCE mode facilitates testing and debugging of systems using AT89C51ID2 with-
out removing the circuit from the board. The ONCE mode is invoked by driving certain
pins of the AT89C51ID2; the following sequence must be exercised:
•
•
While the AT89C51ID2 is in ONCE mode, an emulator or test CPU can be used to drive
the circuit Table 84 shows the status of the port pins during ONCE mode.
Normal operation is restored when normal reset is applied.
Table 84. External Pin Status during ONCE Mode
(a) "Once" is a registered trademark of Intel Corporation.
pull-up
Weak
ALE
Pull ALE low while the device is in reset (RST high) and PSEN is high.
Hold ALE low as RST is deactivated.
PSEN
pull-up
Weak
Port 0
Float
Port 1
pull-up
Weak
Port 2
pull-up
Weak
Port 3
pull-up
Weak
Port I2
Float
AT89C51ID2
XTALA1/2
Active
XTALB1/2
Active
109