PIC16C765-I/P Microchip Technology, PIC16C765-I/P Datasheet - Page 66

• Manufacturer Part Number: PIC16C765-I/P
• Description: IC MCU OTP 8KX14 USB 40DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C765-I/P

• Core Size: 8-Bit
• Program Memory Size: 14KB (8K x 14)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 24MHz
• Connectivity: SCI, UART/USART, USB
• Number Of I /o: 33
• Program Memory Type: OTP
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4.35 V ~ 5.25 V
• Data Converters: A/D 8x8b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 40-DIP (0.600", 15.24mm)
• Controller Family/series: PIC16C
• No. Of I/o's: 33
• Ram Memory Size: 256Byte
• Cpu Speed: 24MHz
• No. Of Timers: 3
• Processor Series: PIC16C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Maximum Clock Frequency: 24 MHz
• Number Of Programmable I/os: 33
• Number Of Timers: 3
• Operating Supply Voltage: 4.35 V to 5.25 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000, DM163022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 5 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: ISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMING444-1001 - DEMO BOARD FOR PICMICRO MCU
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: Q975613

PIC16C745/765
10.5.1.7
The Address Register (UADDR) contains the unique
USB address that the USB will decode. The register is
reset to 00h after the RESET input has gone active or
the USB has decoded a USB Reset signaling. That will
initialize the address register to decode address 00h
as required by the USB specification. The USB
address must be written by the MCU during the USB
SETUP phase.
REGISTER 10-7: USB ADDRESS REGISTER (UADDR: 196h)
10.5.1.8
This register is used by the USB firmware libraries for
USB status.
REGISTER 10-8: RESERVED SOFTWARE LIBRARY REGISTER (USWSTAT: 197H):.
DS41124C-page 66
Warning: Writing to this register may cause the
bit7
bit 7:
bit 6-0: ADDR<6:0>: This 7-bit value defines the USB address that the USB will decode
bit 7-2
bit 1-0: W Enumeration Status <1:0>: Status of USB peripheral during enumeration
R/W-0
Note 1: Application should not modify these bits.
U-0
—
7
(1)
:Reserved: Read as “X’
USB Address Register (UADDR)
USB Software Status Register (USWSTAT)
Unimplemented: Read as ’0’
00 = Powered
01 = Default
10 = Addressed
11 = Configured
R/W-0
ADDR6
SIE to drop off the Bus.
R/W-0
6
Reserved for CH9 Firmware
R/W-0
ADDR5
R/W-0
5
R/W-0
ADDR4
R/W-0
4
R/W-0
ADDR3
R/W-0
3
Preliminary
R/W-0
ADDR2
R/W-0
2
Enumeration Status
R/W-0
ADDR1
R/W-0
1
ADDR0
R/W-0
R/W-0
0
bit0
2000 Microchip Technology Inc.
R = Readable bit
W = Writable bit
U = Unimplemented bit,
-n = Value at POR reset
R = Readable bit
W = Writable bit
U = Unimplemented bit,
-n = Value at POR reset
read as ‘0’
read as ‘0’