PIC16C765-I/P Microchip Technology, PIC16C765-I/P Datasheet - Page 38

• Manufacturer Part Number: PIC16C765-I/P
• Description: IC MCU OTP 8KX14 USB 40DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C765-I/P

• Core Size: 8-Bit
• Program Memory Size: 14KB (8K x 14)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 24MHz
• Connectivity: SCI, UART/USART, USB
• Number Of I /o: 33
• Program Memory Type: OTP
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4.35 V ~ 5.25 V
• Data Converters: A/D 8x8b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 40-DIP (0.600", 15.24mm)
• Controller Family/series: PIC16C
• No. Of I/o's: 33
• Ram Memory Size: 256Byte
• Cpu Speed: 24MHz
• No. Of Timers: 3
• Processor Series: PIC16C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Maximum Clock Frequency: 24 MHz
• Number Of Programmable I/os: 33
• Number Of Timers: 3
• Operating Supply Voltage: 4.35 V to 5.25 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000, DM163022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 5 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: ISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMING444-1001 - DEMO BOARD FOR PICMICRO MCU
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: Q975613

PIC16C745/765
5.5
PORTE has three pins, RE0/RD/AN5, RE1/WR/AN6
and RE2/CS/AN7, which are individually configured as
inputs or outputs. These pins have Schmitt Trigger
input buffers.
I/O PORTE becomes control inputs for the micropro-
cessor port when bit PSPMODE (TRISE<4>) is set. In
this mode, the user must make sure that the
TRISE<2:0> bits are set (pins are configured as digital
inputs) and that register ADCON1 is configured for dig-
ital I/O. In this mode, the input buffers are TTL.
Register 5-1 shows the TRISE register, which also con-
trols the parallel slave port operation.
PORTE pins may be multiplexed with analog inputs
(PIC16C765 only). The operation of these pins is
selected by control bits in the ADCON1 register. When
selected as an analog input, these pins will read as ’0’s.
TRISE controls the direction of the RE pins, even when
they are being used as analog inputs. The user must
make sure to keep the pins configured as inputs when
using them as analog inputs.
TRISE bits are used to control the parallel slave port.
TABLE 5-9:
DS41124C-page 38
Legend:
Note:
Note 1: The
Note 1:
PORTE and TRISE Registers
RE1/WR/AN6
RE0/RD/AN5
RE2/CS/AN7
On a Power-on Reset, these pins are con-
figured as analog inputs.
PORTE. The PORTE and TRISE registers
are reserved. Always maintain these bits
clear.
OD = open drain, ST = Schmitt Trigger
PIC16C765 only.
Name
PORTE
PIC16C745
(1)
FUNCTIONS
does
Function
RE0
AN5
RE1
AN6
RE2
AN7
WR
RD
CS
not
provide
Input
Type
TTL
TTL
TTL
AN
AN
AN
ST
ST
ST
Preliminary
Output
CMOS
CMOS
CMOS
Type
—
—
—
—
—
—
FIGURE 5-7:
Bi-directional I/O
Parallel Slave Port Control Input
A/D Input
Bi-directional I/O
Parallel Slave Port Control Input
A/D Input
Bi-directional I/O
Parallel Slave Port Data Input
A/D Input
WR
TRIS
Data
Bus
WR
Port
RD Port
To A/D Converter
(1)
(1)
(1)
TRIS Latch
Data Latch
D
D
CK
CK
RD TRIS
(1)
(1)
(1)
PORTE BLOCK DIAGRAM
Q
Q
Description
2000 Microchip Technology Inc.
Q
(1)
Schmitt
Trigger
Input
Buffer
(1)
(1)
EN
EN
D
V
DD
I/O pin