ADAU1381BCPZ Analog Devices Inc, ADAU1381BCPZ Datasheet - Page 58

• Manufacturer Part Number: ADAU1381BCPZ
• Description: IC AUDIO CODEC STEREO LN 32LFCSP
• Manufacturer: Analog Devices Inc
• Type: Stereo Audior

Specifications of ADAU1381BCPZ

• Data Interface: Serial, SPI™
• Resolution (bits): 24 b
• Number Of Adcs / Dacs: 2 / 2
• Sigma Delta: No
• S/n Ratio, Adcs / Dacs (db) Typ: 97 / 100
• Dynamic Range, Adcs / Dacs (db) Typ: 96.5 / 100
• Voltage - Supply, Analog: 1.8 V ~ 3.65 V
• Voltage - Supply, Digital: 1.63 V ~ 3.65 V
• Operating Temperature: -25°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 32-VFQFN, CSP Exposed Pad
• Audio Codec Type: Stereo
• No. Of Adcs: 2
• No. Of Dacs: 2
• No. Of Input Channels: 3
• No. Of Output Channels: 3
• Adc / Dac Resolution: 24bit
• Adcs / Dacs Signal To Noise Ratio: 100dB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ADAU1381
AUDIO CONVERTER CONFIGURATION
Register 16407 (0x4017), Converter Control 0
Bits[6:5], On-Chip DAC Data Selection in TDM Mode
These bits set the position of the DAC input channels on a TDM
stream. In TDM 4 mode, valid settings are first pair or second
pair. In TDM 8 mode, valid settings are first pair, second pair,
third pair, or fourth pair. These bits should be set in conjunction
with Register 16406 (0x4016), Serial Port Control 1, Bit 3, DAC
channel position in TDM, to select where the data should appear
in the TDM stream.
Figure 68, Figure 69, and Figure 70 show examples of different
TDM settings.
Table 42. Converter Control 0 Register
Bits
7
[6:5]
4
3
[2:0]
Description
Reserved
On-chip DAC data selection in TDM mode
00: first pair
01: second pair
10: third pair
11: fourth pair
DAC oversampling ratio
0: 128
1: 64
ADC oversampling ratio
0: 128
1: 64
Converter sampling rate; the numbers in parentheses are example values for a base sample rate of 48 kHz
000: f
001: f
010: f
011: f
100: f
101: f
110: f
111: reserved
S
S
S
S
S
S
S
/6 (8 kHz)
/4 (12 kHz)
/3 (16 kHz)
/2 (24 kHz)
/1.5 (32 kHz)
(48 kHz)
× 2 (96 kHz)
Rev. B | Page 58 of 84
Bit 4, DAC Oversampling Ratio
This bit sets the oversampling ratio of the DAC relative to the
audio sample rate. The higher rate yields slightly better audio
quality but increases power consumption.
Bit 3, ADC Oversampling Ratio
This bit sets the oversampling ratio of the ADC relative to the
audio sample rate. The higher rate yields slightly better audio
quality but increases power consumption.
Bits[2:0], Converter Sampling Rate
These bits set the sampling rate of the audio ADCs and DACs
relative to the sound engine’s audio sample rate.
Default
00
0
0
000