SX1211I084TRT Semtech, SX1211I084TRT Datasheet - Page 41

• Manufacturer Part Number: SX1211I084TRT
• Description: IC SNGL-CHIP TXRX 32-TQFN
• Manufacturer: Semtech

Specifications of SX1211I084TRT

• Frequency: 860 ~ 960MHz
• Data Rate - Maximum: 200kbps
• Modulation Or Protocol: FSK, OOK
• Applications: AMR, ISM, Security and Access
• Power - Output: 12.5dBm
• Sensitivity: -113dBm
• Voltage - Supply: 2.1 V ~ 3.6 V
• Current - Receiving: 3mA
• Current - Transmitting: 25mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-TQFN
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Modulation Type: FSK/OOK
• Package Type: TQFN EP
• Operating Supply Voltage (min): 2.1V
• Operating Supply Voltage (typ): 2.5/3.3V
• Operating Supply Voltage (max): 3.6V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Compliant
• Other names: SX1211I084TRT

As illustrated in Figure 34, in Continuous mode the NRZ data to (from) the (de)modulator is directly accessed by
the uC on the bidirectional DATA pin (20). The SPI Data, FIFO and packet handler are thus inactive.
In Tx mode, a synchronous data clock for an external uC is provided on IRQ_1 pin. Its timing with respect to the
data is illustrated in Figure 35. DATA is internally sampled on the rising edge of DCLK so the uC can change logic
state anytime outside the greyed out setup/hold zone.
The use of DCLK is compulsory in FSK and optional in OOK.
Rev 7 – Sept 2
ADVANCED COMMUNICATIONS & SENSING
5.3. Continuous Mode
Data
Datapath
5.3.1. General Description
5.3.2. Tx Processing
Tx/Rx
nd
Rx
, 2008
DATA (NRZ)
DCLK
SYNC
RECOG.
Figure 34: Continuous Mode Conceptual View
Figure 35: Tx Processing in Continuous Mode
SX1211
T_DATA
CONTROL
T_DATA
Page 41 of 92
CONFIG
SPI
NSS_CONFIG
MISO
SCK
MOSI
IRQ_0
IRQ_1(DCLK)
DATA
www.semtech.com
SX1211