M30873FHBGP#U3 Renesas Electronics America, M30873FHBGP#U3 Datasheet - Page 599

• Manufacturer Part Number: M30873FHBGP#U3
• Description: IC M32C/87 MCU FLASH 100LQFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M32C/80r

Specifications of M30873FHBGP#U3

• Core Processor: M32C/80
• Core Size: 16/32-Bit
• Speed: 32MHz
• Connectivity: EBI/EMI, I²C, IEBus, IrDA, SIO, UART/USART
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 24K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 26x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LQFP
• For Use With: R0K330879S001BE - KIT DEV RSK M32C/87R0K330879S000BE - KIT DEV RSK M32C/87
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

M32C/87 Group (M32C/87, M32C/87A, M32C/87B)
REJ09B0180-0151 Rev.1.51 Jul 31, 2008
Page 575 of 587
•
•
•
If an A/D conversion in progress is forcibly aborted by setting the ADST bit in the AD0CON0 register to 0
(A/D conversion stops), the A/D conversion result will be incorrect. The AD0i register which is not performing
A/D conversion may also be incorrect. If the ADST bit is set to 0 during A/D conversion, do not use values
obtained from any of AD0i registers.
External triggers cannot be used in DMAC operating mode. Do not read the AD00 register using instructions.
To abort an A/D conversion in progress by setting the ADST bit in the AD0CON0 register to 0 in single sweep
mode, disable interrupts before setting the ADST bit to 0.
(Technical update: TN-16C-132A/EA)
28. Usage Notes