PIC18F2320-I/SO Microchip Technology, PIC18F2320-I/SO Datasheet - Page 143

• Manufacturer Part Number: PIC18F2320-I/SO
• Description: IC MCU FLASH 4KX16 EEPROM 28SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F2320-I/SO

• Core Size: 8-Bit
• Program Memory Size: 8KB (4K x 16)
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (7.5mm Width)
• Controller Family/series: PIC18
• No. Of I/o's: 25
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 512Byte
• Cpu Speed: 40MHz
• No. Of Timers: 4
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: SPI, I2C, USART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 2 x 8 bit
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE4000, ICE2000, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Package: 28SOIC W
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 40 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT28SO-1 - SOCKET TRANSITION 28SOIC 300MIL
• Lead Free Status / Rohs Status: Details

16.0
In 40 and 44-pin devices, the CCP1 module is
implemented as a standard CCP module with
enhanced PWM capabilities. Operation of the Capture,
Compare and standard single output PWM modes is
described in Section 15.0 “Capture/Compare/PWM
(CCP) Modules”. Discussion in that section relating to
PWM frequency and duty cycle also apply to the
enhanced PWM mode.
REGISTER 16-1:
© 2007 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-6
bit 5-4
Note:
R/W-0
P1M1
ENHANCED CAPTURE/
COMPARE/PWM (ECCP)
MODULE
The ECCP (Enhanced Capture/ Compare/
PWM) module is only available on
PIC18F4X20 devices.
P1M1:P1M0: PWM Output Configuration bits
If CCP1M3:CCP1M2 = 00, 01, 10 (Capture, Compare or disabled):
xx = P1A assigned as Capture/Compare input; P1B, P1C, P1D assigned as port pins
If CCP1M3:CCP1M2 = 11 (PWM modes):
00 = Single output: P1A modulated; P1B, P1C, P1D assigned as port pins
01 = Full-bridge output forward: P1D modulated; P1A active; P1B, P1C inactive
10 = Half-bridge output: P1A, P1B modulated with dead-band control; P1C, P1D assigned as port pins
11 = Full-bridge output reverse: P1B modulated; P1C active; P1A, P1D inactive
DC1B1:DC1B0: PWM Duty Cycle Least Significant bits
Capture mode:
Unused.
Compare mode:
Unused.
PWM mode:
These bits are the two LSbs of the 10-bit PWM duty cycle. The eight MSbs of the duty cycle are found
in CCPR1L.
R/W-0
P1M0
CCP1CON: ECCP CONTROL REGISTER (40/44-PIN DEVICES)
W = Writable bit
‘1’ = Bit is set
DC1B1
R/W-0
PIC18F2220/2320/4220/4320
DC1B0
R/W-0
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
CCP1M3
R/W-0
The ECCP module differs from the CCP with the addi-
tion of an enhanced PWM mode which allows for 2 or
4 output channels, user-selectable polarity, dead band
control and automatic shutdown and restart. These
features are discussed in detail in Section 16.4
“Enhanced PWM Mode”.
The control register for CCP1 is shown in Register 16-1.
It differs from the CCP1CON register of PIC18F2X20
devices in that the two Most Significant bits are
implemented to control enhanced PWM functionality.
CCP1M2
R/W-0
x = Bit is unknown
CCP1M1
R/W-0
DS39599G-page 141
CCP1M0
R/W-0
bit 0