PIC18F87J50-I/PT Microchip Technology, PIC18F87J50-I/PT Datasheet - Page 45

• Manufacturer Part Number: PIC18F87J50-I/PT
• Description: IC PIC MCU FLASH 64KX16 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F87J50-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 128KB (64K x 16)
• Package / Case: 80-TFQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: EBI/EMI, I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 65
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3936 B
• Interface Type: I2C, MSSP, SPI, EUSART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 66
• Number Of Timers: 5
• Maximum Operating Temperature: + 100 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183032, DM183022, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162087 - HEADER MPLAB ICD2 18F87J50 68/84MA180021 - MODULE PLUG-IN 18F87J50 FS USBAC164328 - MODULE SKT FOR 80TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

2.5
In addition to the peripheral clock/4 output in certain
oscillator modes, the device clock in the PIC18F87J10
family can also be configured to provide a reference
clock output signal to a port pin. This feature is avail-
able in all oscillator configurations and allows the user
to select a greater range of clock submultiples to drive
external devices in the application.
This reference clock output is controlled by the
REFOCON register (Register 2-3). Setting the ROON
bit (REFOCON<7>) makes the clock signal available
on the REFO (RE3) pin. The RODIV3:RODIV0 bits
enable the selection of 16 different clock divider
options.
The ROSSLP and ROSEL bits (REFOCON<5:4>) con-
trol the availability of the reference output during Sleep
mode. The ROSEL bit determines if the oscillator on
REGISTER 2-3:
© 2009 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5
bit 4
bit 3-0
ROON
R/W-0
Reference Clock Output
ROON: Reference Oscillator Output Enable bit
1 = Reference oscillator enabled on REFO pin
0 = Reference oscillator disabled
Unimplemented: Read as ‘0’
ROSSLP: Reference Oscillator Output Stop in Sleep bit
1 = Reference oscillator continues to run in Sleep
0 = Reference oscillator is disabled in Sleep
ROSEL: Reference Oscillator Source Select bit
1 = Primary oscillator used as the base clock. Note that the crystal oscillator must be enabled using
0 = System clock used as the base clock; base clock reflects any clock switching of the device
RODIV3:RODIV0: Reference Oscillator Divisor Select bits
1111 = Base clock value divided by 32,768
1110 = Base clock value divided by 16,384
1101 = Base clock value divided by 8,192
1100 = Base clock value divided by 4,096
1011 = Base clock value divided by 2,048
1010 = Base clock value divided by 1,024
1001 = Base clock value divided by 512
1000 = Base clock value divided by 256
0111 = Base clock value divided by 128
0110 = Base clock value divided by 64
0101 = Base clock value divided by 32
0100 = Base clock value divided by 16
0011 = Base clock value divided by 8
0010 = Base clock value divided by 4
0001 = Base clock value divided by 2
0000 = Base clock value
the FOSC2:FOSC0 bits; crystal maintains the operation in Sleep mode.
U-0
—
REFOCON: REFERENCE OSCILLATOR CONTROL REGISTER
W = Writable bit
‘1’ = Bit is set
ROSSLP
R/W-0
ROSEL
R/W-0
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
PIC18F87J50 FAMILY
RODIV3
R/W-0
OSC1 and OSC2, or the current system clock source,
is used for the reference clock output. The ROSSLP bit
determines if the reference source is available on RE3
when the device is in Sleep mode.
To use the reference clock output in Sleep mode, both
the ROSSLP and ROSEL bits must be set. The device
clock must also be configured for an EC or HS mode;
otherwise, the oscillator on OSC1 and OSC2 will be
powered down when the device enters Sleep mode.
Clearing the ROSEL bit allows the reference output
frequency to change as the system clock changes
during any clock switches.
The REFOCON register is an alternate SFR and
shares the same memory address as the OSCCON
register. It is accessed by setting the ADSHR bit
(WDTCON<4>) in the WDTCON register (see
Register 25-9).
RODIV2
R/W-0
x = Bit is unknown
RODIV1
R/W-0
DS39775C-page 45
RODIV0
R/W-0
bit 0