PIC18F87J50-I/PT Microchip Technology, PIC18F87J50-I/PT Datasheet - Page 177

• Manufacturer Part Number: PIC18F87J50-I/PT
• Description: IC PIC MCU FLASH 64KX16 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F87J50-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 128KB (64K x 16)
• Package / Case: 80-TFQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: EBI/EMI, I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 65
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3936 B
• Interface Type: I2C, MSSP, SPI, EUSART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 66
• Number Of Timers: 5
• Maximum Operating Temperature: + 100 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183032, DM183022, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162087 - HEADER MPLAB ICD2 18F87J50 68/84MA180021 - MODULE PLUG-IN 18F87J50 FS USBAC164328 - MODULE SKT FOR 80TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

11.2.4
Buffered Parallel Slave Port mode is functionally iden-
tical to the legacy Parallel Slave Port mode with one
exception: the implementation of 4-level read and write
buffers. Buffered PSP mode is enabled by setting the
INCM bits in the PMMODEH register. If the INCM<1:0>
bits are set to ‘11’, the PMP module will act as the
buffered Parallel Slave Port.
When the Buffered mode is active, the PMDIN1L,
PMDIN1H, PMDIN2L and PMDIN2H registers become
the write buffers and the PMDOUT1L, PMDOUT1H,
PMDOUT2L and PMDOUT2H registers become the
read buffers. Buffers are numbered 0 through 3, start-
ing with the lower byte of PMDIN1L to PMDIN2H as the
read buffers and PMDOUT1L to PMDOUT2H as the
write buffers.
11.2.4.1
For read operations, the bytes will be sent out sequen-
tially, starting with Buffer 0 (PMDOUT1L<7:0>) and
ending with Buffer 3 (PMDOUT2H<7:0>) for every read
strobe. The module maintains an internal pointer to
keep track of which buffer is to be read. Each of the
buffers has a corresponding read status bit, OBxE, in
the PMSTATL register. This bit is cleared when a buffer
contains data that has not been written to the bus, and
is set when data is written to the bus. If the current
buffer location being read from is empty, a buffer under-
FIGURE 11-5:
© 2009 Microchip Technology Inc.
Master
PMD<7:0>
BUFFERED PARALLEL SLAVE
PORT MODE
PMWR
PMRD
PMCS
READ FROM SLAVE PORT
PARALLEL MASTER/SLAVE CONNECTION BUFFERED EXAMPLE
Data Bus
Control Lines
PMD<7:0>
PMCS1
PMRD
PMWR
PIC18F87J50 FAMILY
flow is generated, and the Buffer Overflow flag bit
OBUF is set. If all four OBxE status bits are set, then
the Output Buffer Empty flag (OBE) will also be set.
11.2.4.2
For write operations, the data is be stored sequentially,
starting with Buffer 0 (PMDIN1L<7:0>) and ending with
Buffer 3 (PMDIN2H<7:0). As with read operations, the
module maintains an internal pointer to the buffer that
is to be written next.
The input buffers have their own write status bits, IBxF
in the PMSTATH register. The bit is set when the buffer
contains unread incoming data, and cleared when the
data has been read. The flag bit is set on the write
strobe. If a write occurs on a buffer when its associated
IBxF bit is set, the Buffer Overflow flag, IBOV, is set;
any incoming data in the buffer will be lost. If all four
IBxF flags are set, the Input Buffer Full Flag (IBF) is set.
In Buffered Slave mode, the module can be configured
to generate an interrupt on every read or write strobe
(IRQM1:IRQM0 = 01). It can be configured to generate
an interrupt on a read from Read Buffer 3 or a write to
Write Buffer 3, which is essentially an interrupt every
fourth read or write strobe (RQM1:IRQM0 = 11). When
interrupting every fourth byte for input data, all input
buffer registers should be read to clear the IBxF flags.
If these flags are not cleared, then there is a risk of
hitting an overflow condition.
Address
Pointer
Write
PMDOUT1L (0)
PMDOUT1H (1)
PMDOUT2H (3)
PMDOUT2L (2)
PIC18 Slave
WRITE TO SLAVE PORT
Address
Pointer
Read
PMDIN1H (1)
PMDIN2H (3)
PMDIN1L (0)
PMDIN2L (2)
DS39775C-page 177