M5307C3 Freescale Semiconductor, M5307C3 Datasheet - Page 96

• Manufacturer Part Number: M5307C3
• Description: KIT EVALUATION FOR MCF5307
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®r
• Type: Microprocessorr

Specifications of M5307C3

• Contents: Module Board, Installation Guide, Power Supply, Cable, Software and more
• Processor To Be Evaluated: MCF5307
• Interface Type: Ethernet
• For Use With/related Products: MCF5307
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Once the network parameters have been obtained, the Rom Monitor must be
configured.
parameters.
For example,
123.45.67.1. The board is assigned the IP address of 123.45.68.15. The
gateway
commands to dBUG are:
The last step is to inform dBUG of the name and type of the file to download.
Prior to giving the name of the file, keep in mind the following.
Most, if not all, TFTP servers will only permit access to files starting at a
particular sub-directory.
arbitrary files by unknown
/tftp_boot as the default TFTP directory. When
SunOS TFTP server, all filenames are relative to /tftp_boot. As a result, you
normally will be required to copy the file to download into the directory used
by the TFTP server.
A default filename for network downloads is maintained by dBUG. To change
the default filename, use the command:
When using the Ethernet network for download, either S-record, COFF, ELF, or
Image files may be downloaded.
maintained by dBUG as well.
set client <client IP>
set server <server IP>
set
set
set
set client 123.45.68.15
set server 123.45.67.1
set gateway 123.45.68.250
set netmask 255.255.255.0
set Macaddr 00:00:00:00:00:00
set
set
IP address is 123.45.68.250, and the netmask is 255.255.255.0. The
gateway
netmask
Macaddr
filename
filetype
The following commands
the TFTP server is named
<gateway
<netmask>
<macaddr>
<filename>
<srecord|coff|elf|image>
Freescale Semiconductor, Inc.
For More Information On This Product,
persons.) For example, SunOS uses the directory
(This
Go to: www.freescale.com
is a security feature which prevents reading of
To change the default filetype, use the command:
IP>
A default filetype for network downloads is
2
are used to configure the network
‘santafe’ and
specifying a filename to a
has
IP address