M5307C3 Freescale Semiconductor, M5307C3 Datasheet - Page 16

• Manufacturer Part Number: M5307C3
• Description: KIT EVALUATION FOR MCF5307
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®r
• Type: Microprocessorr

Specifications of M5307C3

• Contents: Module Board, Installation Guide, Power Supply, Cable, Software and more
• Processor To Be Evaluated: MCF5307
• Interface Type: Ethernet
• For Use With/related Products: MCF5307
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Once you verified that all the items are present, remove
protective jacket.
are no broken, damaged, or missing parts. If you have not received all the
items listed above or they are damaged, please contact Cadre III immediately
in order to correct the problem.
1.9.2.
The board as shipped is ready to be connected to a terminal and the power
supply without any need for modification.
insure proper operation from the first time you apply the power.
Jumper
connectors, which you need to refer to in the following sections. The steps to
be taken are:
1.9.3.
The board accepts two means of power supply connections. Connector P2 is a
2.1mm power jack and P1 lever actuated connector.
9V DC (regulated or unregulated) at 1.5 Amp via either one of the connector
2. M5307C3 User's Manual, this documentation
3. One RS-232 communication cable
4. Debug wiggler cable
5. Programmers Reference Manual
6. A selection of Third Party Developer Tools and Literature
a. Connecting the power supply.
b. Connecting the terminal.
Table and Locations shows
AVOID TOUCHING THE MOS DEVICES. STATIC DISCHARGE CAN
AND WILL DAMAGE THESE DEVICES.
Preparing the Board for Use
Providing Power to the Board
Check the board for any visible damage.
Contact
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
NO.
1
2
WARNING
the placement of the jumpers
Ground
1-7
+6.5-9V
Voltage
However,
follow the steps below to
The board accepts 6.5V to
the board from its
Ensure that there
Figure 3
and the