M5307C3 Freescale Semiconductor, M5307C3 Datasheet - Page 13

• Manufacturer Part Number: M5307C3
• Description: KIT EVALUATION FOR MCF5307
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®r
• Type: Microprocessorr

Specifications of M5307C3

• Contents: Module Board, Installation Guide, Power Supply, Cable, Software and more
• Processor To Be Evaluated: MCF5307
• Interface Type: Ethernet
• For Use With/related Products: MCF5307
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1.3
There are two on board Flash ROM’s (U20, U21), U20 is
and the U21 is the least significant byte. The M5307C3
29LV004 Flash ROM’s programmed
AM29LV004DT Flash are 4Mbits each giving a total of 1Mbyte of Flash memory
There is one 168-pin DIMM socket for SDRAM.
16-Bits SDRAM totaling 16M of volatile memory.
are supported.
The MCF5307 has 4K bytes organized as 1024x32 bits of internal SRAM.
The internal cache of the MCF5307
associative, unified (instruction and data) cache with a 16-byte line size. The
ROM Monitor currently does not utilize the cache, but programs downloaded
with the ROM Monitor can use the cache.
The M5307C3
unpopulated.
1.4
The MCF5307
rate generators.
Driver/Receivers to make the channel compatible with RS-232. UART0 is used
by the debugger for the user to access with a terminal. In addition, the
signals of both channels are available on
be viewed by a logic analyzer. UART0 channel is the “TERMINAL” channel used
by the debugger for communication with external terminal/PC. The “TERMINAL’
baud rate is set at 19200
1.5
MCF5307
individually programmed
multiplexed with TT(1:0), TM(2:0), DREQ(1:0), and XTIP.
parallel port bits PP(15:8) is multiplexed with address bus bits A(31:24). Both
bytes of the parallel port are controlled by the Pin Assignment Register (PAR).
SYSTEM
SERIAL
PARALLEL
offers one 16-bit general-purpose parallel I/O port. Each pin can be
has 2 built-in UART’s (UART0 and UART1) with independent baud
MEMORY
COMMUNICATION
evaluation board has a foot print for 512 K SRAM
I/O
The signals of channel one are passed through external
PORTS
Freescale Semiconductor, Inc.
For More Information On This Product,
as input or output. The parallel port bits PP(7:0) is
Go to: www.freescale.com
CHANNELS
with a debugger/monitor
is a non-blocking, 8kbyte, 4-way
1-4
the mictor connectors LA1 and LA3 to
System ships with 1M x 8 Bank x
Various SDRAM configurations
the most significant byte
The second set of
comes
firmware.
with two
but is
Both
set-