M5307C3 Freescale Semiconductor, M5307C3 Datasheet - Page 22

• Manufacturer Part Number: M5307C3
• Description: KIT EVALUATION FOR MCF5307
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®r
• Type: Microprocessorr

Specifications of M5307C3

• Contents: Module Board, Installation Guide, Power Supply, Cable, Software and more
• Processor To Be Evaluated: MCF5307
• Interface Type: Ethernet
• For Use With/related Products: MCF5307
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1.10 SYSTEM
Now that you have connected all the cables, you may apply power to the
board.
power-up message on the terminal, which includes the amount of the memory
present.
Hard
DRAM Size: 8M
NE2000:
Copyright 1997-1998 Motorola, Inc.
ColdFire® MCF5307 EVS Debugger Vx.x.x (xxx 199x xx:xx:xx:)
Enter ‘help’ for help.
d B U G >
The board is now ready for operation under the control of the debugger as
described in Chapters 2.
following checks:
If you still are not receiving the proper response, your board may have bee
damaged in shipping.
1.11 M5307C3
Reset
1. Make sure that the power supply is properly set and
2. Check that the terminal and board are set for the same
3. Press the red RESET button to insure that the board has been
After power is applied, the dBUG initializes the board then display
0x300
connected to the board.
character format and baud.
initialized properly.
POWER-UP
Jumper
Freescale Semiconductor, Inc.
Contact Cadre III for further instructions.
Setup
For More Information On This Product,
AND
If you do not get the above response, perform the
Go to: www.freescale.com
INITIAL
1-13
OPERATION
All Rights Reserved.